Chapter VI: Part I: Fastenings. 123 illus. 291 pp. demy 8vo

(_New York, 1903_) _net_ 12 6

=Chimney Design and Theory.= By W. W. CHRISTIE. Second
edition, 54 illus. 192 pp. crown 8vo. (_New York, 1902_)
_net_ 12 6

=Furnace Draft=: its Production by Mechanical Methods. By W.
W. CHRISTIE. 5 illus. 80 pp. 18mo, boards. (_New York, 1906_)
_net_ 2 0

=Working and Management of Steam Boilers and Engines.= By F.
COLYER. Second edition, 108 pp. crown 8vo. (_1902_) 3 6

=The Stokers’ Catechism.= By W. J. CONNOR. 63 pp. limp cloth.
(_1906_) _net_ 1 0

=Treatise on the use of Belting= for the Transmission of
Power. By J. H. COOPER. Fifth edition, 94 illus. 399 pp. demy
8vo. (_New York, 1901_) _net_ 12 6

=The Steam Engine considered as a Thermodynamic Machine.= By
J. H. COTTERILL. Third edition, 39 diagrams, 444 pp. 8vo.
(_1896_) 15 0

=Fireman’s Guide=, a Handbook on the Care of Boilers. By K.
P. DAHLSTROM. Ninth edition fcap. 8vo. (_New York, 1902_)
_net_ 1 6

=Diseases of a Gasolene Automobile=, and How to Cure Them. By
A. L. DYKE and G. P. DORRIS. 127 illus. 201 pp. crown 8vo.
(_New York, 1903_) _net_ 6 6

=Belt Driving.= By G. HALLIDAY. 3 folding plates, 100 pp.
8vo. (_1894_) 3 6

=Worm and Spiral Gearing.= By F. A. HALSEY. 13 plates, 85 pp.
18mo, boards. (_New York_) _net_ 2 0

=Commercial Efficiency of Steam Boilers.= By A. HANSSEN.
Large 8vo, sewed. (_1898_) 0 6

=Corliss Engine.= By J. T. HENTHORN. Third edition, 23 illus.
95 pp. square 16mo. (_New York, 1904_) 3 6

=Liquid Fuel= for Mechanical and Industrial Purposes. By E.
A. BRAYLEY HODGETTS. 106 illus. 129 pp. 8vo. (_1890_) 5 0

=Elementary Text-Book on Steam Engines and Boilers.= By J. H.
KINEALY. Fourth edition, 106 illus. 259 pp. 8vo. (_New York,
1903_) _net_ 8 6

=Centrifugal Fans.= By J. H. KINEALY. 33 illus. 206 pp. fcap.
8vo, leather. (_New York, 1905_) _net_ 12 6

=Mechanical Draft.= By J. H. KINEALY. 27 original tables and
13 plates, 142 pp. crown 8vo. (_New York, 1906_) _net_ 8 6

=The A. B. C. of the Steam Engine=, with a description of
the Automatic Governor. By J. P. LISK. 6 plates, 12mo. (_New
York, 1902_) _net_ 2 0

=Valve Setting Record Book.= By P. A. LOW. 8vo, boards 1 6

=The Lay-out of Corliss Valve Gears.= By S. A. MOSS. Second
edition, 3 plates, 108 pp. 18mo, boards. (_New York, 1906_)
_net_ 2 0

=Steam Boilers=, their Management and Working. By J. PEATTIE.
Fifth edition, 35 illus. 230 pp. crown 8vo. (_1906_) _net_ 4 6

=Treatise on the Richards Steam Engine Indicator.= By C. T.
PORTER. Sixth edition, 3 plates and 73 diagrams, 285 pp. 8vo.
(_1902_) 9 0

=Practical Treatise on the Steam Engine.= By A. RIGG. Second
edition, 103 plates, 378 pp. demy 4to. (_1894_) 1 5 0

=Slide Valve Simply Explained.= By W. J. TENNANT. Revised by
J. H. KINEALY. 41 illus. 83 pp. crown 8vo. (_New York, 1899_)
_net_ 4 6

=Shaft Governors.= By W. TRINKS and C. HOOSUM. 27 illus. 97
pp. 18mo, boards. (_New York, 1905_) _net_ 2 0

=Slide and Piston Valve Geared Steam Engines.= By W. H.
UHLAND. 47 plates and 314 illus. 155 pp. Two vols. folio,
half morocco. (_1882_) 1 16 0

=How to run Engines and Boilers.= By E. P. WATSON. Fifth
edition, 31 illus. 160 pp. crown 8vo. (_New York, 1904_) 3 6

=Position Diagram of Cylinder with Meyer Cut-off.= By W. H.
WEIGHTMAN. On card. (_New York_) _net_ 1 0

=Practical Method of Designing Slide Valve Gearing.= By E. J.
WELCH. 69 diagrams, 283 pp. Crown 8vo. (_1890_) 6 0

=Elements of Mechanics.= By T. W. WRIGHT. Illustrated, 372
pp. 8vo. (_New York, 1896_) 10 6

METALLURGY.

Iron and Steel Manufacture.

=Life of Railway Axles.= By T. ANDREWS. 8vo, sewed. (_1895_) 1 0

=Microscopic Internal Flaws in Steel Rails and Propeller
Shafts.= By T. ANDREWS. 8vo, sewed. (_1896_) 1 0

=Microscopic Internal Flaws, Inducing Fracture in Steel.= By
T. ANDREWS. 8vo, sewed. (_1896_) 2 0

=Relations between the Effects of Stresses= slowly applied
and of Stresses suddenly applied in the case of Iron and
Steel: Comparative Tests with Notched and Plain Bars. By P.
BREUIL. 23 plates and 60 illus. 151 pp. 8vo. (_1904_) _net_ 8 0

=Brassfounders’ Alloys.= By J. F. BUCHANAN. Illustrated, 129
pp. crown 8vo. (_1905_) _net_ 4 6

=Foundry Nomenclature.= The Moulder’s Pocket Dictionary and
concise guide to Foundry Practice. By JOHN F. BUCHANAN.
Illustrated, 225 pp. crown 8vo. (_1903_) _net_ 5 0

=American Standard Specifications for Steel.= By A. L. COLBY.
Second edition, revised, 103 pp. crown 8vo. (_New York,
1902_) _net_ 5 0

=Galvanised Iron=: its Manufacture and Uses. By J. DAVIES.
139 pp. 8vo. (_1899_) _net_ 5 0

=Management of Steel.= By G. EDE. Seventh edition, 216 pp.
crown 8vo. (_1903_) 5 0

=Galvanising and Tinning=, with a special Chapter on Tinning
Grey Iron Castings. By W. T. FLANDERS. 8vo. (_New York_)
_net_ 8 6

=Cupola Furnace.= A practical treatise on the Construction
and Management of Foundry Cupolas. By E. KIRK. Second
edition, 78 illus. 450 pp. demy 8vo. (_New York, 1903_) _net_ 15 0

=Practical Notes on Pipe Founding.= By J. W. MACFARLANE. 15
plates, 148 pp. 8vo. 12 6

=Atlas of Designs concerning Blast Furnace Practice.= By M.
A. PAVLOFF. 127 plates, 14 in. by 10½ in. oblong, sewed.
(_1902_) _net_ 1 1 0

=Album of Drawings relating to the Manufacture of Open Hearth
Steel.= By M. A. PAVLOFF.