Chapter V: Part I: Fastenings. 123 illus., 291 pp., demy 8vo

(_New York, 1903._) 12_s._ 6_d._ net.

=Chimney Design and Theory.= By =W. W. Christie=. Second
edition, 54 illus., 192 pp., crown 8vo. (_New York, 1902._)
12_s._ 6_d._ net.

=Furnace Draft=: its Production by Mechanical Methods. By
=W. W. Christie=. 5 illus., 80 pp., 18mo, boards. (_New
York, 1906._) 2_s._ net.

=The Stokers’ Catechism.= By =W. J. Connor=. 63 pp., limp.
(_1906._) 1_s._ net.

=Treatise on the use of Belting= for the Transmission of Power.
By =J. H. Cooper=. Fifth edition, 94 illus., 399 pp., demy
8vo. (_New York, 1901._) 12_s._ 6_d._ net.

=The Steam Engine considered as a Thermo-dynamic
Machine.= By =J. H. Cotterill=. Third edition, 39 diagrams,
444 pp., 8vo. (_1896._) 15_s._

=Fireman’s Guide=, a Handbook on the Care of Boilers. By
=K. P. Dahlstrom=. Eleventh edition, fcap. 8vo. (S. & C.
SERIES, No. 16.) (_New York, 1906._) 1_s._ 6_d._ net.

=Heat for Engineers.= By =C. R. Darling=. Second edition,
110 illus., 430 pp., 8vo. (FINSBURY TECHNICAL MANUAL.)
(_1912._) 12_s._ 6_d._ net.

=Belt Driving.= By =G. Halliday=. 3 folding plates, 100 pp.,
8vo. (_1894._) 3_s._ 6_d._

=Worm and Spiral Gearing.= By =F. A. Halsey=. 13 plates,
85 pp., 18mo, boards. (_New York, 1903._) 2_s._ net.

=Commercial Efficiency of Steam Boilers.= By =A. Hanssen=.
Large 8vo, sewed. (_1898._) 6_d._

=Corliss Engine.= By =J. T. Henthorn=. Third edition, 23 illus.,
95 pp., crown 8vo. (S. & C. SERIES, No. 23.) (_New York,
1910._) 1_s._ 6_d._ net.

=Liquid Fuel= for Mechanical and Industrial Purposes. By =E. A.
Brayley Hodgetts=. 106 illus., 129 pp., 8vo. (_1890._) 5_s._

=Elementary Text-book on Steam Engines and Boilers.=
By =J. H. Kinealy=. Fourth edition, 106 illus., 259 pp., 8vo.
(_New York, 1903._) 8_s._ 6_d._ net.

=Centrifugal Fans.= By =J. H. Kinealy=. 33 illus., 206 pp., fcap.
8vo, leather. (_New York, 1905._) 12_s._ 6_d._ net.

=Mechanical Draft.= By =J. H. Kinealy=. 27 original tables
and 13 plates, 142 pp., crown 8vo. (_New York, 1906._)
8_s._ 6_d._ net.

=The A B C of the Steam Engine=, with a description of the
Automatic Governor. By =J. P. Lisk=. 6 plates, 8vo.
(S. & C. SERIES, No. 17.) (_New York, 1910._) 1_s._ 6_d._ net.

=Valve Setting Record Book.= By =P. A. Low=. 8vo, boards.
1_s._ 6_d._

=The Lay-out of Corliss Valve Gears.= By =S. A. Moss=.
Second edition, 3 plates, 108 pp., 18mo, boards. (_New
York, 1906._) 2_s._ net.

=Steam Boilers=, their Management and Working. By =J.
Peattie=. Fifth edition, 35 illus., 230 pp., crown 8vo.
(_1906._) 4_s._ 6_d._ net.

=Treatise on the Richards Steam Engine Indicator.= By
=C. T. Porter=. Sixth edition, 3 plates and 73 diagrams,
285 pp., 8vo. (_1902._) 9_s._

=Practical Treatise on the Steam Engine.= By =A. Rigg=.
Second edition, 103 plates, 378 pp., demy 4to. (_1894._)
£1 5_s._

=Power and its Transmission.= A Practical Handbook for
the Factory and Works Manager. By =T. A. Smith=.
76 pp., fcap. 8vo. (_1910._) 2_s._ net.

=Slide Valve Simply Explained.= By =W. J. Tennant=. Revised
by =J. H. Kinealy=. 41 illus., 83 pp., crown 8vo. (_New
York, 1899._) 4_s._ 6_d._ net.

=Shaft Governors.= By =W. Trinks= and =C. Hoosum=. 27 illus.,
97 pp., 18mo, boards. (_New York, 1905._) 2_s._ net.

=Treatise on the Design and Construction of Mill Buildings.=
By =H. G. Tyrrell=. 652 illus., 490 pp., 8vo. (_New York,
1911._) 17_s._ net.

=Slide and Piston Valve Geared Steam Engines.= By =W. H.
Uhland=. 47 plates and 314 illus., 155 pp. Two vols.,
folio, half morocco. (_1882._) £1 16_s._

=How to run Engines and Boilers.= By =E. P. Watson=. Fifth
edition, 31 illus., 160 pp., 8vo. (_New York, 1904._) 3_s._ 6_d._

=Position Diagram of Cylinder with Meyer Cut-off.= By
=W. H. Weightman=. On card. (_New York._) 1_s._ net.

=Practical Method of Designing Slide Valve Gearing.= By
=E. J. Welch=. 69 illus., 283 pp., crown 8vo. (_1890._) 6_s._

=Elements of Mechanics.= By =T. W. Wright=. Eighth edition,
215 illus., 382 pp., 8vo. (_New York, 1909._) 10_s._ 6_d._ net.

METALLURGY

Iron and Steel Manufacture

=Life of Railway Axles.= By =T. Andrews=. 8vo, sewed.
(_1895._) 1_s._

=Microscopic Internal Flaws in Steel Rails and Propeller
Shafts.= By =T. Andrews=. 8vo, sewed. (_1896._) 1_s._

=Microscopic Internal Flaws, Inducing Fracture in Steel.=
By =T. Andrews=. 8vo, sewed. (_1896._) 2_s._

=Practical Alloying.= A compendium of Alloys and Processes
for Brassfounders, Metal Workers, and Engineers. By
=John F. Buchanan=. 41 illus., 205 pp., 8vo. (_New York,
1911._) 10_s._ 6_d._ net.

=Brassfounders’ Alloys.= By =J. F. Buchanan=. 23 illus.,
viii + 129 pp., crown 8vo. (_1905._) 4_s._ 6_d._ net.

=The Moulder’s Dictionary= (Foundry Nomenclature). By
=J. F. Buchanan=. New impression, 26 illus., viii + 225 pp.,
crown 8vo. (_1912._) 3_s._ net.

=American Standard Specifications for Steel.= By =A. L.
Colby=. Second edition, revised, 103 pp., crown 8vo. (_New
York, 1902._) 5_s._ net.

=Galvanized Iron=: its Manufacture and Uses. By =J. Davies=.
139 pp., 8vo. (_1899._) 5_s._ net.

=Management of Steel.= By =G. Ede=. Seventh edition, 216 pp.,
crown 8vo. (_1903._) 5_s._

=The Frodair Handbook for Ironfounders.= 160 pp., 12mo.
(_1910._) 2_s._ net.

=Manufacture of Iron and Steel.= By =H. R. Hearson=. 21
illus., xii + 103 pp., 8vo. (_1912._) 4_s._ 6_d._ net.

=Cupola Furnace.= By =E. Kirk=. Third edition, 106 illus., 484
pp., 8vo. (_New York, 1910._) 15_s._ net.

=Practical Notes on Pipe Founding.= By =J. W. Macfarlane=.
15 plates, 148 pp., 8vo. (_1888._) 12_s._ 6_d._

=Atlas of Designs concerning Blast Furnace Practice.= By
=M. A. Pavloff=. 127 plates, 14 in. by 10½ in. oblong, sewed.
(_1902._) £1 1_s._ net.

=Album of Drawings relating to the Manufacture of Open
Hearth Steel.= By =M. A. Pavloff=.