Chapter VI: Part I: FASTENINGS. 123 illus., 291 pp., demy 8vo. (New York,

1903._) 12s. 6d. net.

=Chimney Design and Theory.= By =W. W. Christie=. Second edition, 54
illus., 192 pp., crown 8vo. (_New York, 1902._) 12s. 6d. net.

=Furnace Draft=: its Production by Mechanical Methods. By =W. W.
Christie=. 5 illus., 80 pp., 18mo, boards. Second edition. (_New
York, 1906._) 2s. net.

=The Stokers’ Catechism.= By =W. J. Connor=. 63 pp., limp. (_1914._)
1s. net.

=Treatise on the use of Belting= for the Transmission of Power. By =J.
H. Cooper=. Fifth edition, 94 illus., 399 pp., demy 8vo. (_New York,
1901._) 12s. 6d. net.

=The Steam Engine considered as a Thermo-dynamic Machine.= By =J. H.
Cotterill=. Third edition, 39 diagrams, 444 pp., 8vo. (_1896._) 15s.

=Fireman’s Guide=, a Handbook on the Care of Boilers. By =K. P.
Dahlstrom=. Eleventh edition, fcap. 8vo. (S. & C. SERIES, No. 16.)
(_New York, 1906._) 1s. 6d. net.

=Belt Driving.= By =G. Halliday=. 3 folding plates, 100 pp., 8vo.
(_1894._) 3s. 6d.

=Worm and Spiral Gearing.= By =F. A. Halsey=. 13 plates, 85 pp., 18mo,
boards. Second ed. (_New York, 1911._) 2s. net.

=Commercial Efficiency of Steam Boilers.= By =A. Hanssen=. Large 8vo,
sewed. (_1898._) 6d.

=Corliss Engine.= By =J. T. Henthorn=. Third edition, 23 illus., 95
pp., crown 8vo. (S. & C. SERIES, No. 23.) (_New York, 1910._) 1s. 6d.
net.

=Liquid Fuel= for Mechanical and Industrial Purposes. By =E. A. Brayley
Hodgetts=. 106 illus., 129 pp., 8vo. (_1890._) 5s.

=Elementary Text-book on Steam Engines and Boilers.= By =J. H.
Kinealy=. Fourth edition, 106 illus., 259 pp., 8vo. (_New York,
1903._) 8s. 6d. net.

=Centrifugal Fans.= By =J. H. Kinealy=. 33 illus., 206 pp., fcap. 8vo,
leather. (_New York, 1905._) 12s. 6d. net.

=Mechanical Draft.= By =J. H. Kinealy=. 27 original tables and 13
plates, 142 pp., crown 8vo. (_New York, 1906._) 8s. 6d. net.

=The A B C of the Steam Engine=, with a description of the Automatic
Governor. By =J. P. Lisk=, 6 plates, 8vo. (S. & C. SERIES, No. 17.)
(_New York, 1910._) 1s. 6d. net.

=Valve Setting Record Book.= By =P. A. Low=. 8vo, boards. 1s. 6d.

=The Lay-out of Corliss Valve Gears.= By =S. A. Moss=. Second edition,
3 plates, 108 pp., 18mo, boards. (_New York, 1906._) 2s. net.

=Steam Boilers=, their Management and Working. By =J. Peattie=. Fifth
edition, 35 illus., 230 pp., crown 8vo. (_1906._) 4s. 6d. net.

=Treatise on the Richards Steam Engine Indicator.= By =C. T. Porter=.
Sixth edition, 3 plates and 73 diagrams, 285 pp., 8vo. (_1902._) 9s.

=Practical Treatise on the Steam Engine.= By =A. Rigg=. Second edition,
103 plates, 378 pp., demy 4to. (_1894._) £1 5s.

=Power and its Transmission.= A Practical Handbook for the Factory and
Works Manager. By =T. A. Smith=. 76 pp., fcap. 8vo. (_1910._) 2s. net.

=Slide Valve Simply Explained.= By =W. J. Tennant=. Revised by =J. H.
Kinealy=. 41 illus., 83 pp., crown 8vo. (_New York, 1899._) 2s. net.

=Shaft Governors.= By =W. Trinks= and =C. Hoosum=. 27 illus., 97 pp.,
18mo, boards. (_New York, 1906._) 2s. net.

=Treatise on the Design and Construction of Mill Buildings.= By =H. G.
Tyrrell=. 652 illus., 490 pp., 8vo. (_New York, 1911._) 17s. net.

=Slide and Piston Valve Geared Steam Engines.= By =W. H. Uhland=.
47 plates and 314 illus., 155 pp. Two vols., folio, half morocco.
(_1882._) £1 16s.

=How to run Engines and Boilers.= By =E. P. Watson=. Sixth ed., 31
illus., 160 pp., 8vo. (_New York, 1913._) 4s. 6d. net.

=Position Diagram of Cylinder with Meyer Cut-off.= By =W. H.
Weightman=. On card. (_New York._) 1s. net.

=Practical Method of Designing Slide Valve Gearing.= By =E. J. Welch=.
69 illus., 283 pp., crown 8vo. (_1890._) 6s.

=Elements of Mechanics.= By =T. W. Wright=. Eighth edition, 215 illus.,
382 pp., 8vo. (_New York, 1909._) 10s. 6d. net.

METALLURGY

Iron and Steel Manufacture

=Life of Railway Axles.= By =T. Andrews=. 8vo, sewed (_1895._) 1s.

=Microscopic Internal Flaws in Steel Rails and Propeller Shafts.= By
=T. Andrews=. 8vo, sewed. (_1896._) 1s.

=Microscopic Internal Flaws, Inducing Fracture in Steel.= By =T.
Andrews=. 8vo, sewed. (_1896._) 2s.

=Practical Alloying.= A compendium of Alloys and Processes for
Brassfounders, Metal Workers, and Engineers. By =John F. Buchanan=.
41 illus., 205 pp., 8vo. (_New York, 1911._) 10s. 6d. net.

=Brassfounders’ Alloys.= By =J. F. Buchanan=. 23 illus., viii + 129
pp., crown 8vo. (_1905._) 4s. 6d. net.

=The Moulder’s Dictionary= (Foundry Nomenclature). By =J. F. Buchanan=.
New impression, 26 illus., viii + 225 pp., crown 8vo. (_1912._) 3s.
net.

=American Standard Specifications for Steel.= By =A. L. Colby=. Second
edition, revised, 103 pp., crown 8vo. (_New York, 1902._) 5s. net.

=Galvanized Iron=: its Manufacture and Uses. By =J. Davies=. 139 pp.,
8vo. (_1914._) 5s. net.

=Management of Steel.= By =G. Ede=. Seventh edition, 216 pp., crown
8vo. (_1903._) 5s.

=The Frodair Handbook for Ironfounders.= 160 pp., 12mo. (_1910._) 2s.
net.

=Manufacture of Iron and Steel.= By =H. R. Hearson=. 21 illus., xii +
103 pp., 8vo. (_1912._) 4s. 6d. net.

=Cupola Furnace.= By =E. Kirk=. Third edition, 106 illus., 484 pp.,
8vo. (_New York, 1910._) 15s. net.

=Practical Notes on Pipe Founding.= By =J. W. Macfarlane=. 15 plates,
148 pp., 8vo. (_1888._) 12s. 6d.

=Atlas of Designs concerning Blast Furnace Practice.= By =M. A.
Pavloff=. 127 plates, 14 in. by 10½ in. oblong, sewed. (_1902._) £1
1s. net.

=Album of Drawings relating to the Manufacture of Open Hearth Steel.=
By =M. A. Pavloff=.