Acetylene, the Principles of Its Generation and Use
by OpenStories
Original author: F. H. Leeds
"Acetylene, the Principles of Its Generation and Use" by F. H. Leeds and W. J. Atkinson Butterfield is a scientific publication likely written in the early 20th century. This practical handbook delves into the generation, purification, and utilization of acetylene gas, particularly for lighting, heat, and power applications, presenting a thorough examination of its physical and chemical properties, advantages over other illuminants, and the practical aspects of using acetylene in various contexts. At the start of the book, the authors outline the intrinsic and hygienic advantages of acetylene lighting compared to traditional illuminants like oil and coal gas. They highlight its superior illuminating power and less impact on air quality due to lower exhaust levels when combusted. The text also includes critical insights into the economic considerations of acetylene systems, emphasizing their compactness and cost efficiency in specific scenarios where traditional gas supplies might be less viable. The first chapter sets the stage for a more in-depth exploration of the chemistry behind acetylene's production from calcium carbide and water, suggesting an emphasis on both the technical and practical applications of acetylene lighting.
Acetylene, the Principles of Its Generation and Use, by F. H. Leeds. Republished by OpenStories from Project Gutenberg eBook #8144.
- 163,635words
- 32chapters
- 0stars
- 0bookmarks
- 0hits
32 Chapters
- 1.Front Matter964 words
- 2.Chapter I: Introductory--The Cost and Advantages of Acetylene Lighting9,008 words
- 3.Chapter II: The Physics and Chemistry of the Reaction Between Carbide and Water (1)8,720 words
- 4.Chapter II: The Physics and Chemistry of the Reaction Between Carbide and Water (2)8,931 words
- 5.Chapter II: The Physics and Chemistry of the Reaction Between Carbide and Water (3)1,277 words
- 6.Chapter III (1)7,938 words
- 7.Chapter III (2)8,896 words
- 8.Chapter III (3)2,655 words
- 9.Chapter II: , about the undesirability of employing a soft solder4,871 words
- 10.Chapter IV: The Selection of an Acetylene Generator (1)8,698 words
- 11.Chapter IV: The Selection of an Acetylene Generator (2)3,340 words
- 12.Chapter V: The Treatment of Acetylene After Generation7,587 words
- 13.Chapter VI: that the use of metallic copper in the construction of5,884 words
- 14.Chapter VI: The Chemical and Physical Properties of Acetylene797 words
- 15.Chapter VII: , a high initial pressure makes for economy in the prime cost2,183 words
- 16.Chapter X: These figures are valuable in connexion with the prevention1,826 words
- 17.Chapter X: , because there would be no air (as in air-gas) in the pipes,7,917 words
- 18.Chapter VII: Mains and Service-Pipes--Subsidiary Apparatus (1)8,725 words
- 19.Chapter VII: Mains and Service-Pipes--Subsidiary Apparatus (2)4,582 words
- 20.Chapter VIII: Combustion of Acetylene in Luminous Burners--Their Disposition7,644 words
- 21.Chapter IX: Incandescent Burners--Heating Apparatus--Motors--Autogenous Soldering7,336 words
- 22.Chapter XI: ), and oxygen coming from another cylinder, are each allowed904 words
- 23.Chapter X: Carburetted Acetylene549 words
- 24.Chapter I: ); partial removal of spirit from carburetted acetylene only1,649 words
- 25.Chapter XI: Compressed and Dissolved Acetylene--Mixtures with Other Gases3,962 words
- 26.Chapter VIII: ). Certainly as a fuel-gas the mixture would be less4,242 words
- 27.Chapter XII: Sundry Uses3,058 words
- 28.Chapter XIII: Portable Acetylene Lamps and Plant315 words
- 29.Chapter I: , or between unit weights, volumes, or monetary equivalents of3,996 words
- 30.Chapter XIV: Valuation and Analysis of Carbide9,019 words
- 31.Appendix: Descriptions of a Number of Acetylene Generators as Made in the Year 1909 (1)8,799 words
- 32.Appendix: Descriptions of a Number of Acetylene Generators as Made in the Year 1909 (2)7,363 words