Skip to content

Chapter I: Front Matter

Text size

INDUSTRIAL POISONING

FROM FUMES, GASES AND POISONS OF MANUFACTURING PROCESSES

BY THE SAME AUTHOR

LEAD POISONING AND LEAD ABSORPTION:

THE SYMPTOMS, PATHOLOGY AND PREVENTION, WITH SPECIAL REFERENCE
TO THEIR INDUSTRIAL ORIGIN AND AN ACCOUNT OF THE PRINCIPAL
PROCESSES INVOLVING RISK.

By THOMAS M. LEGGE M.D. (Oxon.), D.P.H. (Cantab.), H.M. Medical
Inspector of Factories; Lecturer on Factory Hygiene, University
of Manchester; and KENNETH W. GOADBY, D.P.H. (Cantab.),
Pathologist and Lecturer on Bacteriology, National Dental
Hospital. Illustrated. viii+308 pp. 12s. 6_d._ net.

LONDON: EDWARD ARNOLD.

INDUSTRIAL POISONING

FROM FUMES, GASES AND POISONS
OF MANUFACTURING PROCESSES

BY
DR. J. RAMBOUSEK
PROFESSOR OF FACTORY HYGIENE,
AND CHIEF STATE HEALTH OFFICER, PRAGUE

TRANSLATED AND EDITED BY
THOMAS M. LEGGE, M.D., D.P.H.
H.M. MEDICAL INSPECTOR OF FACTORIES
JOINT AUTHOR OF ‘LEAD POISONING AND LEAD ABSORPTION’

WITH ILLUSTRATIONS

LONDON
EDWARD ARNOLD
1913

TRANSLATOR’S PREFACE

I undertook the translation of Dr. Rambousek’s book because it seemed to me to treat the subject of industrial poisons in as novel, comprehensive, and systematic a manner as was possible within the compass of a single volume. Having learnt much myself from Continental writings on industrial diseases and factory hygiene, I was anxious to let others also see how wide a field they had covered and how thorough were the regulations for dangerous trades abroad, especially in Germany. A praiseworthy feature of Dr. Rambousek’s book was the wealth of references to the work of foreign writers which is made on almost every page. To have left these names and references, however, in the text as he has done would have made the translation tedious reading, and therefore for the sake of those who desire to pursue inquiry further I have adopted the course of collecting the great majority and placing them all together in an appendix at the end of the volume.

Dr. Rambousek as a medical man, a chemist, and a government official having control of industrial matters, is equipped with the very special knowledge required to describe the manufacturing processes giving rise to injurious effects, the pathology of the lesions set up, and the preventive measures necessary to combat them. In his references to work done in this country he has relied largely on abstracts which have appeared in medical and technical journals published on the Continent. I have only thought it necessary to amplify his statements when important work carried out here on industrial poisoning,—such as that on nickel carbonyl and on ferro-silicon—had been insufficiently noted. Such additions are introduced in square brackets or in footnotes.

In his preface Dr. Rambousek says ‘the book is intended for all who are, or are obliged to be, or ought to be, interested in industrial poisoning.’ No words could better describe the scope of the book.

The work of translation would never have been begun but for the assistance given me in Parts II and III by my sister, Miss H. Edith Legge. To her, and to Mr. H. E. Brothers, F.I.C., who has been to the trouble of reading the proofs and correcting many mistakes which my technical knowledge was insufficient to enable me to detect, my best thanks are due.

I am indebted to Messrs. Davidson & Co., Belfast, for permission to use figs. 46 and 48; to Messrs. Locke, Lancaster & Co., Millwall, for fig. 27; to Mr. R. Jacobson, for figs. 30, 33, 37, 38, and 43; to Messrs. Siebe, Gorman & Co., for figs. 32, 39, and 40; to Messrs. Blackman & Co. for fig. 47; to Messrs. Matthews & Yates for fig. 54; to H.M. Controller of the Stationery Office for permission to reproduce figs. 52, 53, and 54, and the diagrams on p. 284; and lastly to my publisher, for figs. 41, 42, 43, and 49, which are taken from the book by Dr. K. W. Goadby and myself on ‘Lead Poisoning and Lead Absorption.’

T. M. L.

HAMPSTEAD, _May 1913_.

CONTENTS

PAGE

INTRODUCTION xiii

Comments

Log in to leave a comment.

Industrial Poisoning from Fumes, Gases and Poisons of Manufacturing ProcessesChapter I: Front Matter

0%3 min left in chapter