Chapter IV: Section III: Tools, Parts, and Accessories

10. ITEMS WITH EACH FLAME THROWER.

The items listed below or their equivalents (Fig 7) are included in each M2-2 flame-thrower packing chest, in addition to the flame thrower. Numbers listed with items are Chemical Warfare Service stock numbers.

_a. Kit, tool, for portable flame thrower M2-2, assembly B81-6-50._

_b. Kit, spare parts, for portable flame thrower M2-2, assembly B81-6-52._

_c. Cylinder, ignition, portable flame thrower M1._ (6 cylinders, in 3 cans containing 2 each)

_d. Technical Manual 3-376A, “Portable Flame Thrower M2-2._”

_e. Gun mounting board._ (Fig 10)

_f. Plug, coupling, E81-1-514_ (for use in tank coupling when filling tank group with gun detached).

A. 1 Screw driver, cabinet, 4-1/2-inch blade length, 3/16-inch blade
diameter, H22-50-13.
B. 1 Wrench, hex, 1/8-inch across flats for 1/4-inch socket-head set
screws, H22-49-12.
C. 1 Wrench, engineers’, double head, 3/4-inch and 7/8-inch openings,
9 inches approx length, H22-49-115.
D. 1 Screw driver, common, 6-inch blade length, 5/16-inch blade
diameter, H22-50-6.
E. 1 Wrench, valve-adjusting, assembly, A81-6-48.
F. 1 Wrench, heavy “S”, 1-3/8-inch and 1-1/2-inch openings, 12 inches
approx length, H22-49-113.
G. 1 Wrench, engineers’, single head, 1-1/8 inch opening, 10-1/2
inches approx length, H22-49-31.
H. 1 Wrench, adjustable, single end, 6 inches approx length (crescent
type), H22-49-67.
I. 1 Wrench, heavy “S”, 1-3/8-inch and 1-3/4-inch openings, 12 inches
approx length, A81-6-49.]

A. 1 Diaphragm, valve, assembly, A81-1-416.
B. 1 Case, spring, assembly, B81-1-444.
C. 1 Bushing, pipe, head, 3/4-inch by 1/2-inch (galvanized iron),
H98-5-93.
D. 2 Washers, coupling, A81-1-513.
E. 3 Heads, safety, R81-1-561.]