Chapter III: Part 3

I claim an elliptical carriage spring composed of a single piece, F, or two separate pieces, E E, of steel, united by means of blocks and bolts, substantially as herein shown and specified.

72,038.--HATCH-LINING DRAWINGS.--E.K. Haynes, Hanover, N.H.

I claim a straight-edge or scale having a mechanism for effecting an intermittent movement of the same, substantially as described.

Also in combination therewith the tongue, q, tor angular lining, substantially as described.

Also in combination with the feed mechanism, a mechanism for presenting the straight edge in positions radiating from a center, substantially as set forth.

72,037.--PLATFORM SCALE.--D. Hazzard, Milton, Del.

I claim the Hollow stand, A, the spindle, C, the springs, D, the elastic rod, G, and the graduated plate, H, in combination and arranged substantially as shown and described tor the purposes set forth.

72,038.--PIANO LOCK.--Adam Helmstaedter, Newark, N.J.

I claim the pin, a, secured in the oscillating hook, C, and catching in a slot in the hook, C', substantially as and tor the purpose described.

72,039.--TWEER.--John B. Himberg, Frederick City, Md.

I claim a tweer consisting of the box, A, annular cover, C, with a convex under side, and of the removable ring, E, from which the concave plate, F, is suspended, all made and operating substantially as herein shown and described.

72,040.--LAMP FOR BURNING PETROLEUM.--James Hinks and Joseph Hinks, Birmingham, England.

We claim, 1st, Constructing the burners of the said lamps substantially in the manner hereinbefore described and illustrated in figs. 1, 2, 3, 4, 5, and 6, of the accompanying drawings, that is to say, the combination in the same burner, of two or more flat or curved wick cases or holders, in which two or more flat wicks are placed, so as to produce thereby two or more flat flames or elliptical of nearly circular flames.

2d, Constructing and arranging the shade holders or galleries of the said lamps for the purpose of admitting air to the flames, substantially in the manner hereinbefore described, and illustrated in figs. 7, 11, 12 13 and 14, of the accompanying drawings.

3d, Supporting the shade holders or galleries in a vase, or cup on the top of the pillar of the lamp, and supplying air to the lamp through the said pillar or vase, or supporting them in a cup or vase without a pillar, the air in this case being supplied through the vase, substantially in the manner hereinbefore described, and illustrated in fig. 7 of the accompanying drawings.

4th, The improvement described and illustrated in figs. 11, 12, 13, and 14, of the accompanying drawings, for isolating the shade from the shade holder or gallery.

5th, The arrangement or combination of the parts of punkah-protectors or wind protectors, substantially in the manner hereinbefore described, and illustrated in figs. 7, 8, 9, 10, 11, 15, and 16, of the accompanying drawings.

72,041.--DEVICE FOR LASHING AND BINDING.--John M. Hirlinger, Red Rock, Pa.

I claim the cord, A, provided with the links, B and C, hooked lever, D, and slide, E, with its ring, a, arranged and used as and for the purpose set forth.

72,042.--TOOL FOR OPENING FRUIT CANS.--Horace Holt, New York city.

I claim, 1st, A tool for opening sheet metal cans, composed of a hand lever, B, carrying a tooth, c, and connected to tongs, A, or other equivalent means, capable of clamping said tooth-carrying lever to the can, as set forth.

2d, Placing the tooth, c, in an oblique direction, when the same is used in combination with the hand lever, B, and clamping device A, substantially as and for the purpose described.

3d, The raised bearing, d, in combination with the lever, B, and clamping device, A, substantially as and for the purpose set forth.

72,043.--MOP WRINGER.--Zadok Howe, Lowell, Mich.

I claim the treadle, G, and spring bail, E, in combination with the rollers, B and C, the same being used as and for the purpose specified.

72,044.--MACHINE FOR MAKING EYELETS.--David K. Hoxsie, Providence, R.I.

I claim the combination of the eyelet forming punch, C, the eyelet forming die, e, and the punch, G, arranged and operating substantially as herein described, for the purpose set forth.

Also, in combination with the eyelet forming punch, J, and cutting punch, H, as described, the spring or snapper, g, arranged and operating substantially as described, for the purpose specified.

72,045.--RAILWAY SLEEPING CAR.--George W. Hunt, Hopkinton, Mass.

I claim the construction and arrangement of the backs of car seats, by which the whole of some of the backs, and parts of others, are formed into berths, in connection with adjacent seats, substantially as described.

Also, the combination of the leaves, n, p, and q, hinged as shown, and to fold together, for a day car, or to be extended and made into a berth for a night car, substantially as described.

72,046.--HARVESTER.--George M. Jackson, North Hector, N.Y.

I claim the arrangement and combination of the toothed wheels, S and T, crank, U, box, W, of the hinged frame, V, adjustable finger bar, J, hoisting rope or chain, Y, and lever, Z, when constructed and operated as herein described and for the purposes set forth.

72,047.--REVERSIBLE SADIRON.--S.M. Johnson, Lockport, N.Y.

I claim, 1st, The combination, with a reversible sadiron, A, of the hollow handle, C, forming a reservoir, i, the pipe, D, leg, l, and set screw, H, or equivalent, arrranged and operating substantially in the manner and for the purpose set forth.

2d, Also, in combination therewith, the pipe, E, provided with burner, e, cone, G, and stop-cock, F, arranged and operating substantially as specified.

72,048.--BOOT AND SHOE.--William Keats, and John Keats, Street, England.

We claim the construction of coverings for the feet, substantially hereinbefore set forth, that is so say, with the sole cut at the edge, and sewed to the edge of the upper while turned outward, substantially as described.

72,049.--MUFF.--M.A. King, New York city.

I claim a muff provided with the skeleton spring frame B, made in sections, for the purpose of sustaining its cylindrical form, and adapting it for use as a reticule or pocket, substantially as shown and described.

72,050.--HORSE HAY FORK.--Alfred Knapp, North Fairfield, Ohio.

I claim the hinged chisel, c, in combination with the main piece, A, rod, B, brace piece, G, and holder, D, constructed substantially as described, and for the purposes set forth.

72,051.--FIFTH WHEEL FOR CARRIAGES.--Joshua Lawrence, Palmyra, N.Y.

I claim the combination of the housings, a a, inclosing the rollers, b b, with the bows, G H, the whole conducted and arranged as described, and operating in the manner and for the purpose set forth.

72,052.--WASHING-MACHINE.--J.Q. Leffingwell, Nevada, Iowa.

I claim the combination of the semi-cylindrical box, D, segment, W, pinion

P, parts, m m', lever, H, and ribs, r, as herein described, for the purpose specified.

72,053.--DOOR-FASTENER.--Francis C. Levaliey, Warnerville, N.Y.

I claim the sliding wedge bolt, F, in combination with the sliding spring catch, K, and cases, E J, as herein described, for the purpose specified.

72,054.--CONDENSING ENGINE.--William A. Lighthall, New York city.

I claim the arrangement of the ordinary jet condenser, B, air pump, D, and hot well, E, with the surface condenser, F, and the valves, H K, and L, as shown and described, so that the change from the use of the jet condenser can be made at will, and _vice versa_,

73,055.--MACHINE FOR FORMING AND TEMPERING ELLIPTIC SPRINGS.--Geo. S. Long, Bridgeport, Ct.

I claim, 1st, A steel spring former, substantially as shown and described, and for the purposes set forth.

2d, The vibrating rod, B, and shoe, f', and any former, F, in combination with the slotted wheel, W, and roller, W', substantially as shown and described, and for the purpose set forth.

3d, The hollow shaft, s', and roller, W, in combination with the binder or presser, D, substantially as shown and described, and for the purposes set forth.

4th, The sliding crank pin, p, in combination with the slotted wheel, W, and slotted vibrating rod, B, substantially as shown and described, and for the purposes set forth.

72,056.--FURNACE FOR HOT AIR BLAST.--Richard Long, Chillicothe, Ohio.

I claim, 1st, Constructing the air pipe of a furnace-blast heater of fire clay, substantially as described.

2d, Constructing the air pipe of an oval or other equivalent form, and uniting the sections of which it is composed by socket joints, with clumps and keys, substantially as shown and described.

3d, Forming the supporting walls, B, of firebrick, with iron plates between the courses, substantially as shown and described,

4th, Placing an open or a solid plate beneath the air pipe, substantially as and for the purposes herein described.

72,057.--CLOTHES RACK.--Eugene F. Lyman, Indianapolis, Ind.

I claim the combination and arrangement of the semi-circular racks G and H, the arms, f and c, the sockets and staples for the arms, and the box, A B C D, all operating substantially as and for the purpose specified.

72,058.--CENTER BOARD FOR VESSELS.--E. J. McFarlin, San Francisco, Cal.

I claim the location of the center boards, or other equivalent devices for the same specific purpose, in the extreme bow and stern of vessels, that is to say, the placing of the said boards forward of the foremast or aft of the mainmast, in two masted vessels, and forward of the foremast and aft of the mizzen mast in three masted vessels, substantially as shown and described, and for the objects and purposes specified.

72,059.--REGISTER POINTS FOR PRINTING PRESS.--E. W. McGowan, New York city.

I claim, 1st, The pivoted or jointed pointer, B, having a spring or equivalent weight attached, and arranged to operate in the manner substantially as and for the purpose set forth.

2d, The tube, A, provided with the slotted cap plate, b, and the nut, C, when used in connection with the pointer, for the purpose specified.

72,060.--ROOFING.--Orville Manly, Garrettsville, Ohio.

I claim, 1st, a roof composed of tiles, a and b, having spaces, S, between them for a water tight cement, substantially as shown and described, and for the purposes set forth.

2d, The saturated tiles, a, and the saturated tiles, b, substantially as shown and described, and for the purposes set forth.

3d, The lower or outer row of tiles, b, when laid together, forming an eaves trough, substantially as shown and described, and for the purpose set forth.

72,061.--REFINING CAST IRON AND CONVERTING IT INTO STEEL.--Emile Martin and Pierre E. Martin, Paris, France.

We claim the method and means for refining and converting cast iron into cast steel and other metals, substantially as herein shown and described.

72,062.--STRAW CUTTER.--John W. Mauzy, Richmond, and James Hughes, Cambridge, Ind., assignor to James Hughes.

We claim, 1st, The combination of the side pieces, D D, constructed as described, containing the bearings for the cutting mechanism, the shearing bar, B, with square faces, and the spirally bladed knife, C, arranged substantially as described.

2d, The combination of the perforated rollers, E, ratchet wheels, F, pawls, H1, i add R, adjustable oscillating arm, G1, eccentric rod, L, and eccentric, M, respectively, constructed and arranged substantially as set forth.

3d, The arrangement of the cap, G, rollers, E E, covers, Q, sides pieces, D D, knife, C, and the driving and the feed mechanism, constructed and combined substantially as set forth.

4th, The feed rollers E, when constructed from sheet metal, and punched from the inside, forming projections as shown, for feeding the straw to the knife.

5th, The metallic side pieces, D D, constructed as described, in combination with the bar, B, knife, C, feed rollers, E E, arranged substantially as set forth.

6th, The combination of the eccentric, M, on the knife shaft, eccentric rod, L, and oscillating arm, G1, when the latter are so arranged as to regulate the cut by adjusting the point of attachment, substantially in the manner set forth.

72,063.--CONVERTIBLE SHOT GUN AND RIFLE.--Samuel McCulloch, Yellow Springs, Ohio.

I claim, 1st, The removable barrel, C, constructed with external collars, c, and secured within a shot gun barrel, A, by a screw, D, substantially as and for the purposes set forth.

2d, Also the plug, F, for the purposes set forth.

72,064.--DERRICK.--D. J. McDonald, Gold Hill, Nevada.

I claim, 1st, The derrick standard, L, and frame, K, fitted in the derrick frame, J, and arranged as shown, for the ready adjustment of the standard, L.

2d, The fitting of the derrick frame, J, on the wagon frame, as shown, to wit by means of the circular plate, D, frame, F, and circular plate, G, with the wheel, E, and pinion, Y, to admit of the ready turning of the derrick, as set forth.

3d, The supports, D, provided with screws, a, and attached to the frame, B as shown, in connection with the levels, b, in platform, C, for the purpose of levelling the device, substantially as described.

4th, The angular platform, C, applied to the wagon, A, when used in combination with a revolving derrick frame, J, substantially as and for the purpose specified.

72,065.--AUGERS.--John A. McGee (assignor to Theodore Mace), New York city.

I claim the boring instrument formed with a cutting edge extending outwardly from the base of the tapering screw, and curved backwards and downwards until it intersects the periphery of the tool, as and for the purposes set forth.

72,066.--DRY DOCK.--Israel J. Merritt, New York city.

I claim, 1st, The arrangement and combination with a floating section or dock, A, of one or more wells, through which a lifting chain or chains are passed down to the vessel or object to be raised, substantially as described.

2d, The arrangement and combination of the lever, J, with the floating dock or section, A, and chain or chains, C, substantially as described.

3d, The shape of the well, B, the same being made flaring from its top downwards, so as to allow the chains to go or be conducted from the mouth of the well directly towards the vessel or object to be raised, substantially as shown.

72,067.--KNIFE AND FORK CLEANER.--John Merritt, New York city.

I claim, 1st, The combination of the circular disks, D, leather or equivalent rubbers, K, shaft, A, holding plates, E E', adjusting nut, G, and adjusting screw, I, with each other and with the box, B, substantially as herein shown and described, and for the purpose set forth.

2d, The combination of the friction wheel, O, brush, N, and shaft, L, with each other, and with the disk, D, and box, B, substantially as herein shown and described, and for the purpose set forth.

3d, The combination of the lever, M, spring, P, and hook, R, with the brush shaft, L, and box, B, substantially as herein shown and described, and for the purpose set forth.

72,068.--MANUFACTURE OF LAMP BLACK.--A. Millochan, New York city, assignor to R.N. Perlee, Jersey City, N.J.

I claim the method herein specified of manufacturing lamp black by condensing the carbonaceous vapors upon a surface directly over the flame, that is constantly kept sufficiently cool by artificial means.

72,069.--CAR BRAKE.--James Mitchell, La Porte, Ind.

I claim, 1st, The combination of the lever, A, rod, B, lever, C, pawls, D and D1, spring, D2, and ratchet wheel, E, substantially as and for the purpose set forth.

2d, The combination of the shaft, E3, collar, R, arm, R', collar, S, and shaft, I, substantially as set forth.

3d, The combination of the shaft, I, spiral collar, U, lever, T, and arm, R, for disengaging the brakes, substantially as set forth.

4th, The combination of the ratchet bar, P, with the inclined face, P1, and catch lever, G, substantially as and for the purpose set forth.

5th, The combination of the ratchet bar, P, with its shoulder, P2, and the lever, T, substantially as and for the purpose set forth.

72,070.--AUTOMATIC TABLE FOR TEACHING.--Hannah Munson, Rockford, Ill., administratrix of the estate of Wm. C. Munson, deceased.

I claim the combination of the frame, A, with its pivoted pointers, C C, and hooks, e e, and movable bars, B B, with pointers and charts, D, as constructed, the whole being arranged and used substantially as and for the purpose specified.

72,071.--HYDRANT.--John G. Murdock, Cincinnati, Ohio.

I claim, 1st, The hollow plunger, E, having the interior valve, I, and sleeve packing, F, which respectively close and encircle the supply and waste pipe, B, as and for the purpose set forth.

2d, In combination with the supply and waste pipe, B, and valve, I, the vertically adjustable hollow plunger, E, for the object stated.

3d, The adjustable shoulder or lock nut, J, in combination and arrangement with the elements, B, D, I and E.

4th, The arrangement of internally packed plunger, E, which surrounds and packs a vertical supply pipe, B, having one or more waste ways, D, and being enclosed within and guided by a cup, C, substantially as described.

72,072.--CLEANER FOR LAMP CHIMNEYS.--R.B. Musson, Champaign, Ill.

I claim a cleaner for lamp chimneys, bottles, and other articles of a similar character, consisting of strips of rubber, or other soft elastic substance, secure to a holder, and arranged in manner and for the purposes substantially above set forth and described.

72,073.--BOOT AND SHOE HEEL.--Erastus Newhall, Lynn, assignor to himself and John R. Moffitt, Chelsea, Mass.

I claim a heel made with a circular thread and a corresponding seat, when one or both of the two parts are made of elastic material, and are united substantially as described.

72,074.--PORTABLE HOT AIR CONDUCTOR.--John B. Oldershaw, Baltimore, Md.

I claim a portable hot air receiver and conductor, constructed, arranged and operating in connection with a stove, for the purpose of heating apartments above it, substantially as described.

72,075.--VINE HOLDER.--Garret J. Olendorf and Albert O. Parshall, Middlefield, N.Y.

We claim, 1st, The frame, A, constructed as described and set forth, for the purpose specified.

2d. The cord, B, combined with and supported by frame, A, as described and set forth, for the purpose specified.

72,076.--BREECH-LOADING FIRE-ARMS.--Henry O. Peabody (assignor to the Providence Tool Company), Providence, R.I.

I claim combining the breech block, A, hinged at its posterior extremity, and operating as described, with the hammer, D, by means of the protuberant inclined plane, C, or its equivalent, substantially as described for the purposes specified.

72,077.--RAILWAY CROSSINGS.--Stanhope Perkins, Fairfield, England.

I claim forming the points or V-parts of crossings, without splice, by bending the rail, prepared as above described, back upon itself, and securing the abutting parts in the manner and for the purpose above set forth.

72,078.--MANUFACTURE OF LAMP BLACK.--R.N. Perlee, Jersey City, N.J.

I claim the method herein specified of manufacturing lamp black, by introducing atmospheric air to the flame, by artificial means, for the purposes set forth.

72,079.--AXLE BOX.--Henry B. Pitner, La Porte, Ind.

I claim, 1st, An axle box, substantially as shown and described, and for the purpose set forth.

2d, The sleeve or thimble, A, in combination with the end pieces, B, substantially as shown and described, and for the purposes set forth.

3d, The shoulder, a1, and the shoulder, a2, in combination with the sleeve A, and end pieces, B, substantially as shown and described, and for the purposes set forth.

72,080.--RAILWAY CHAIR.--Leander Pollock, (assignor to himself and John P. Schenck, Jr.), Matteawan, N.Y.

I claim 1st, A railroad-chair which is divided by an inclined line drawn through the base, into two parts, A and B, each part carrying one of the cheeks, and all made and operating substantially as herein shown and described.

2d, Interposing an elastic plate, g, between the edge of the upper base, d, and the stationary cheek, a, substantially as and for the purpose herein shown and described.

72,081.--VENTILATING HAY-MOWS.--Geo. Race, Norwich, N.Y.

I claim making vertical perforated pipes, having lateral branches extending out from the main pipe for the purpose of ventilating hay-mows, and stacks of hay or grain, substantially as herein set forth.

72,082.--PNEUMATIC CAR.--Louis Ransom, Lansingburg, N.Y.

I claim in combination with a pneumatic car, a series of metal cylinders for containing compressed air, the said cylinders being connected by pipes, so as to form one common reservoir substantially as described.

2d, I also claim the combination, with a stove for warming the car, or other heating apparatus, a conducting pipe, for the compressed air, so located with reference to the stove or other heating apparatus that the compressed air in passing through it will become heated, and have its expansive power increased thereby, substantially as described.

3d, I also claim the compound flexible pipe, constructed substantially as described.

4th, I also claim the muffler, D, for the purpose of deadening the sound of the escaping air as described.

72,083.--MACHINE FOR SHARPENING SAWS.--E.B. Rich, (assignor to himself and Andre Cashing), Boston, Mass.

I claim the sliding holder, B. and adjustable rail, C, in combination with the grinding wheel, D, constructed and arranged to operate as herein described, for the purpose specified.

72.084.--AUTOMATIC REGISTER.--J.T. Buckley, Ottawa, Ill. administrator of the estate of Stephen Rigler, deceased.

I claim 1st, Operating a register slide so as to regulate the temperature of apartments, by means of a column of mercury within a tube, which is arranged within the register itself and acts upon said slide through the means substantially as described.

2d, The combination of an index hand, B, with a register arranged and operated by a column of mercury within a tube, which is arranged within the register itself, substantially as described.

3d, The combination with a circular turning register slide, B, of mercury pipe, G', piston rod, g1, cross head, g, toothed lever, F, spur wheel, d, and shaft, b, arranged, constructed and operating substantially as described.

72,085.--SHOVEL PLOW, CULTIVATOR, ETC.--P.A. Ross, Harveys, Pa.

I claim 1st, The combination of the notched rack, E, and removable pin, F, with the pivoted or rocking cross-bar, C, and slotted standard, B, substantially as herein shown and described and for the purpose set forth.

2d, Connecting the forward ends of the handles, D, to the beam, A, by means of the hook or eye-bolt, G, and pivoted bar or plate, H, when used in connection with the pivoted or rocking cross bar, C, and pin, F, substantially as herein shown and described and for the purpose set forth.

72,086.--FENCE POST.--Robert Ramsey, New Wilmington, Pa.

I claim the fence-post, P P' P", having dove-tail gains at its lower end, in combination with the parallel slits, A A', and the keys, e e e e, substantially in the manner and for the purpose set forth.

72,087.--CHURN.--J.A. Rowley, Vanceburg, Ky.

I claim the arrangement substantially as described of the driving wheel, C, shafts, c c', spring, D, notched bracket, E e. and friction pulley, F G, for the purpose of imparting a rotary motion to the dasher shaft, f, in the manner herein described and set forth.

72,088.--STEAM TRAP.--David Saunders, Brooklyn, N.Y. assignor to Jos. Nason & Co., New York city.

I claim 1st, The arrangement of the central part, C, of the cover and main cover, B, substantially as herein set forth.

2d, The arrangement of the stop-joint between the floating part and the fixed part of the apparatus, whereby to avoid the clogging by accumulations of dirt as specified.

3d, The arrangement of the tubes E and H, the tube, H, being mounted upon the floating part, substantially as herein specified.

72,089.--DOOR SPRING.--Rudolph Schrader, Indianapolis, Ind.

I claim 1st, The door-spring, constructed as described, consisting of the hollow socket, F, placed over the square shank of the door arm: and provided with the right angular arm, J, sleeve, E, to which the inner end of the coiled spring, D, is securely fastened, fitting at or alternating upon the socket, F, and provided with the right angular arm, I, resting against the post, H, in the case, A, the free end, G, of the spring resting against the opposite side of said post, all operating as described for the purpose specified.

2d, The spring, D, operated by means of the right angular arm, J, of the hollow shank, F, engaging with the outer end, G, of the spring when the door moves in one direction, and when moving in the opposite direction engaging with the arm, I, of the sleeve, E, to which the inner end of the spring is secured substantially as described for the purpose specified.

3d, The combination and arrangement within the case, A, of the spring, D, hollow socket, F, having arm, J, sleeve, E, having arm, I, post, H, and hook, G, operating as described for the purpose specified.

72,090.--POLE COUPLING FOR VEHICLES.--Anson Searls, N.Y. city.

I claim the circular joints, B B, and the arrangement of the ratchet teeth, K K, springs, D D, and bolts, E E, in combination with the arm, A, substantially as described and for the purposes set forth.

72,091.--CARRIAGE.--Anson Searls, San Francisco, Cal.

I claim, 1st, The axle composed of the steel bars, d and g, attached, as herein described.

2d, The clip b, passing around under the axle, with its ends fastened to the plate a, on the rocker, both before and behind the axle, substantially as described.

72,092.--STEAM ENGINE.--George Shale, Taunton, Mass.

I claim, 1st, The steam-chest, B, constructed with the chambers, gh, and partition, p, in combination with the steam and exhaust pipes, and cylinder, a, substantially as described.

2d, The valve-rods, i i', provided with the recesses or chambers, k k, in combination with the partition, p, constructed as described, and operated by the lever, l, as and for the purpose set forth.

72,093.--FERRULE.--Archibald Shaw, Philadelphia, Pa.

I claim a ferrule, provided internally, or at its inner side, with oblique spurs or projections, substantially as and for the purpose specified.

72,094.--FENCE POST.--Warren H. Shay, Sylvania, Ohio.

I claim the plank standards, B B, joined by the pins, a a, the braces, A A, and the cross-piece, C, combined and secured by the dove-tail tenons, o b, the gib and key, c d, and the keys, g g, substantially as and for the purpose herein shown and described.

72,095.--TABULAR HEATER.--C.J.Shepard, Brooklyn, N.Y.

I claim, 1st, The combination of the grate, E, ash-pit, D, and combustion-chamber, C, with the slide-valve, I, for the purposes indicated.

2d, The slide-valve at the junction of the upper and under front flue, for the purposes described.

3d, The upper front flue covered externally with a non-conducting lining as a portion of the combustion-chamber.

4th, The corrugated tubular externally-flanged chamber, provided with an incombustible termination, constructed and operating substantially as shown for the purposes pointed out.

5th, A semi-cylindrical reverberating chamber of combustion, when combined with a flue and a series of tubes, for the purposes specified.

6th, A feeding-chamber in combination with an arched chamber of combustion and the abutments for properly distributing the fuel upon the grate.

7th, Constructing the bed-plate or grate-plate in such a manner that the same shall form a support for the grate and brick-work of the chamber of combustion, as well as the bed of the front flue.

8th, The division-plate, in combination with a series of tubes, for the purposes fully described.

72,096.--WINDOW-SASH SUPPORTER.--J.W.Simpson, Newark, N.J.

I claim the lever, d, and wedge, b, constructed, combined, and operated substantially in the manner and for the purpose hereinabove set forth.

Also, the socket, m, with its ratch, n, and the catch, i, on the lever, d, in combination with the lever and wedge, in the manner and for the purpose specified.

72,097.--STAKE-HOLDER FOR RAILROAD CARS.--Thomas A. Slack, Peoria county, Ill.

I claim the combination of revolving staple, stakes, and divisional "coal sides." as described and for the purpose set forth.

72,098.--EXCAVATOR.--Benjamin Slusser, Sidney, Ohio, assignor to himself and Elias M. Gluck, same place.

I claim, 1st, The method of elevating or adjusting the plough of an excavator by the rotary motion of the forward axle, derived from the forward wheels by means of the clutches, a' a', substantially as and for the purposes set forth.

2d, In combination with the above, the plough, P, racks, r r, and pinion, a, when the latter is fixed to the axle, and operates to raise the plough by power derived from the axle, substantially as and for the purpose specified.

3d, The combination of the rocking cart, C, gear, e e'e", apron, B, and plough, P, when the parts are so constructed and arranged that by the raising or depressing of the plough, the wheels, e e', shall be thrown into or out of gear, and the apron put in motion or stopped, substantially as and for the purpose specified.

4th. The combination of the looped rods, w w w, with the arms, v v v, doors, m m' m", and lever, 1", substantially as and for the purpose specified.

5th, The lips or projections, o o, of the doors, m m' m", substantially as and for the purposes set forth.

6th. The combination of the rod, u, lever, l', spring, s, trigger, n, doors, m m' m", having the lips, o o o, rod, y', and hook, y, substantially as and for the purposes specified.

72,099.--AUGER HANDLE.--Daniel Y. Smith, Joliet, Ill.

I claim the combination of the ferrule, a, with the annular nut, e, and flat spring, c, when constructed and arranged as and for the purposes set forth.

72,100.--MACHINE FOR SHARPENING SAWS.--J.B.Smith, Milwaukee, Wis.

I claim cutter, B, gauge, E, and adjustable cone-mandrel, D, in combination, substantially as and for the purpose described.

72,101.--RAISING OILS AND BURNING-FLUIDS BY PNEUMATIC PRESSURE.--John Henry Smith, Allegheny city, Pa.

I claim raising, by pneumatic pressure, oils or burning-fluids from an oil or fluid compartment of a ship or other vessel, and mixing with said oil and fluid the gas generated therefrom, as herein described and set forth.

Also, the combination and arrangement of the pipes, A B C f and f', when used in connection with the oil or fluid compartment, R, of a ship or other vessel, the whole being constructed, arranged, and operating substantially in the manner hereon described and set forth.

Also, in connection with the above, ejecting fine jets of water into the flame, caused by the burning of the oil or fluid and other matter mixed therewith, as herein described and set forth.

72,102.--SHIP FOR TRANSPORTING PETROLEUM.--John H. Smith, Allegheny city, Pa.

I claim, providing the hulls of ships and other vessels with a compartment for oils and burning fluids, said compartment being protected with water, and furnished with supply and discharge pipes, substantially as herein described and for the purpose set forth.

72,103.--DEVICE FOR SHEARING AND CLIPPING WOOL.--R.T.Smith and J.K.Priest, Nashua, N.H.

I claim, 1st, The revolving spring cutter or cutters, O, in connection with a cutter-plate.

2d, The open cutter-plate, P.

3d, The shield, N, in connection with the cylinder, C, covering shaft, M, and extending into groove, g, substantially in the manner and for the purpose herein described.

72,104.--CORN PLOUGH.--John Snyder, Williamsfield, Ohio.

I claim the combination of the tongue, H, strap, L, and upright, K, with the forward end of the central beam, A, substantially as herein shown and described, and for the purpose set forth.

72,105.--BOOT-HEEL POLISHER.--V.K.Spear, Lynn, Mass.

I claim, 1st, The reciprocating polisher, moving in the line of an arc of a circle, by means of mechanism substantially as herein described, and having an elastic bearing, as and for the purpose set forth.

2d, In combination with a reciprocating polisher, substantially as described, I claim the pivoted sliding frame to support the boot or shoe constructed, arranged, and operating substantially as set forth.

72,106.--MEANS FOR PROPELLING VESSELS.--Robt.R. Spedden and Daniel F. Stafford, Astoria, Oregon.

We claim, 1st, The combination of the rack-frame, K, racks, I and J, and ratchet wheel, H, with each other and with a shaft, D, for the purpose of applying power to said shaft, substantially as herein shown and described.

2d, The combination of the stationary post, O, pitman, N, rocking-post, M, and adjusting slide, L, with each other, with the rack frame, K, and with the hinged parts of a vessel or other structure, one or both of said hinged parts floating in the water, so as to be acted upon by the motion of the waves, substantially as herein shown and described.

72,107.--CULTIVATOR.--C.E.Steller, Chicago, Ill.

I claim, 1st, The hinged runners, J W, substantially as and for the purpose set forth.

2d, The slotted sides, A A and B B, in combination with the shanks, C D E, arranged to be set at different angles, and fastened by set-screws, Z Z, as described.

3d, The combination of the guide-bar, E, arranged to be raised and lowered, with rear standards, H H, and sides, A A B B, as described.

4th, The combination of standards, G G, hinged runners, J W, and sides, A A B B, as set forth.

5th, The shanks, U, of shovel, T, arranged to fit in a socket, V, and bar, S, in combination with standards, G G, and cross-bar, I, as and for the purpose set forth.

6th, The double evener, L, arranged substantially as set forth.

7th, The double evener, L, in combination with braces, O O and P P, with or without braces, Y, substantially as set forth.

72,108.--EYE CUP.--Benj. F. Stephens, Brooklyn, N.Y.

I claim a pair of bowls, united by tubes or necks to an exhaustion-bag or ball, as and for the purposes set forth.

72,109.--HARVESTER RAKE.--Edward Stewart, Fort Madison, Iowa.

I claim the arrangement of the shafts, D E and G, with their respective wheels, crank, I, and pitman, J, with its dividing end, J', connecting the arms, e e, upon the box, K', at the end of shaft, K, the whole constructed and operating substantially as and for the purposes specified.

72,110.--STREET PAVEMENT.--H. M. Stow, San Francisco, Cal.

I claim, 1st, A wooden pavement, composed of alternate tiers of square-ended and wedge-shaped blocks, the wedge-shaped ends of the latter being driven down into a foundation-bed of sand or earth, substantially as and for the purpose described.

2d, A wooden pavement, composed of blocks with lower ends wedge-formed, and all driven down into a foundation-bed of sand or earth, substantially as shown and described.

72,111.--STREET PAVEMENT.--H. M. Stow, San Francisco, Cal.

I claim, 1st, The cast iron plates, with projecting wedge-shaped flanges to be driven into the sand or earth, substantially as and for the purpose set forth.

2d, Also, a pavement composed of alternate tiers of cast iron plates, with projecting wedge-shaped flanges and wedge-shaped wooden blocks, driven into the sand and earth, substantially as described.

72,112.--WASHING MACHINE.--John D Swartz, Milton, Pa

I claim, 1st, The slotted aims, g, bearing the shaft, D, and rubber, C, when such arms are connected at their lower ends by the slotted bar, E, through which the spring, G, passes as herein described for the purpose specified.

2d, The combination of the semi-circular rubber, C, slotted arms, g, shaft, D, slotted cross-bar, E, spirally grooved rollers, d, in the curved frames, B, the spring, G, and rack, H, as herein described for the purpose specified.

72,113.--PORTABLE FENCE.--G. D. Sweigert, Martic township, Pa., assignor to himself, John Sweigert and Felix W. Sweigert.

I claim a portable fence, combined of round wrought-iron posts, C, bed-plate, A, rails, B, scarfed, and applied with intervening ferrules, D, head and bottom washers, F, all arranged in the manner and for the purpose specified.

72,114.--VARIABLE CRANK FOR BORING MACHINE.--G. C. Taft, Worcester, Mass., assignor to Theodore Mace, Sing Sing, N.Y.

I claim the two variable cranks, constructed as specified, and applied in the manner shown, to the shaft or axis of the boring machine, as and for the purposes set forth.

72,115.--ROTARY TAKE-UP FOR KNITTING MACHINE.--James Teachout, Waterford, N.Y.

I claim, 1st, The stationary scroll plate, C, placed over the center of motion of take-up of knitting machines, for the purpose described.

2d, Also, in combination with the scroll plate, C, the toothed gear, D, for the purpose herein set forth.

3d, Also, the toothed wheel, D, or its equivalent, either separately, or combined with the described appendages e i g i K, arranged as shown and described as operating substantially in the manner and for the purpose specified.

4th, Also, in combination with the above, the adjustable gear, s, and concentric gears, s', for the purpose described.

72,116.--KNITTING MACHINE.--James Teachout, Waterford, N.Y.

I claim 1st, Forming the "jacks" or loop-lifters, B, with a projecting are, f, and depressed arc, g, for the purposes set forth.

2d, n combination with the arc, f, and arch, g, the rounded end, as shown and described.

3d, In combination with the described knitting jacks, a retaining hub or device, constructed and arranged as shown and described.

72117,--KNITTING MACHINE--James Teachout, Waterford, N.Y.

I claim, 1st, The vertically adjustable collars or rings, G and H, for the purposes described.

2d, In combination with the collars, G and H, the partitions or wings, k, and groove, l, as set forth.

3d, In combination with the adjustable collars, G and H, wings, k, and groove, l, the "jacks" or lifters, M, formed as shown and described, for the purpose specified.

72,118.--MANUFACTURING ILLUMINATING GAS.--J. B. Terry, Hartford, Conn.

I claim, 1st, The method herein described of heating air charged with hydrocarbon vapor, so as to render it non-condensable previous to its delivery as an illuminating gas, for the purposes set forth.

2d, The employment of a retort or other heating medium interposed between the carbureter and gas holder or other gas-delivering or gas-burning device, substantially as and for the purposes set forth.

3d, The employment of one or more burners under the retort or vessel, for the purpose of heating the same under the arrangement herein shown and described.

4th, The combination, with the carbureting vessel and intermediate heater, of a jacket under or around the sand carbureter, and a flue connecting the jacket with said heater, substantially in the manner and for the purposes set forth.

72,119.--LOOMS.--S. T. Thomas and J. H. Dolley, Guildford, N.H.

We claim, in combination with the lever, g, arranged to operate as set forth, the incline, n, or its equivalent, for relieving the picker from the action of the spring, i, to permit free movement of the shuttle boxes, substantially as set forth.

72,120.--GATE.--John W. Thompson, Greenfield, Mass.

I claim a gate, made of metallic tubing and connections, substantially as herein set forth and described.

72,121.--TAIL-PIECE FOR VIOLINS.--James Thoms, South Boston, Mass.

I claim applying a winch to the tail-piece of a violin, substantially as and for the purpose herein shown and described.

72,122.--FOLDING BEDSTEAD AND CRIB.--R. S. Titcomb, Gloversville, N.Y.

I claim, 1st, A folding bedstead or crib, substantially as shown and described, and for the purpose set forth.

2d, a rotating bedding-box, A, in combination with the head and foot-boards of a bedstead or crib, substantially as shown and described, and for the purpose set forth.

3d, Folding head and foot-boards, composed of the parts, F and C, substantially as shown and described, and for the purposes set forth.

4th, The swinging sides, A', in combination with the box, A, and the head and foot-boards, F C, substantially as shown and described, and for the purposes set forth.

72,123.--STEAM ENGINE.--J. F. Troxel, Bloomsville, Ohio.

I claim, 1st, The construction of the oscillating valve, T, and arrangement of the openings, S P P', and R, substantially as shown and described.

2d, Also the arrangement of the piston rods, K and L, operating in one and the same end of the cylinder, substantially as shown and described.

72,124.--WARDROBE.--Nathan Turner, West Lynn, Mass.

I claim a convertible wardrobe, closet, or bookcase, with swinging or folding sides, C, and swinging or folding top, A, and bottom, B, substantially as described and for the purpose set forth.

72,125.--APPARATUS FOR DISTILLING OILS.--Herbert W.C. Tweddle, Pittsburg, Pa

I claim, 1st, A trough or troughs, having perforations for the passage of the oil in small quantities and furnished with points near to such perforations, so as to cause the oil to pass therefrom in drops, or fine streams, or thin films or layers, over heated pipes or tubes placed thereunder, when used within a vacuum still, for the purposes substantially as described.

2d, In a vacuum still for distilling oil, the use of a series or coil of steam pipe, placed horizontally, one under another, as a series of evaporating surfaces, substantially as and for the purposes above set forth.

3d, In a vacuum still for distilling oil, a series or coil of steam jet pipes, e, in combination with a series or coil of evaporating pipes, a, substantially as and for the purposes above set forth.

4th, Combining together a series of apparatus, such as hereinbefore described, for the purpose of procuring a continuous distillation of petroleum, each member of a series consisting of a vacuum still containing a coil of steam pipe as evaporating surfaces, and troughs for the gradual distillation of the oil, in combination with suitable condensing apparatus, substantially as and and for the purposes hereinbefore set forth.

5th, A vacuum residnum receiver D, connected to and in combination with a vacuum still, or a battery of such stills, substantially in the manner and for the purposes above set forth.

72,126.--DISTILLING HYDROCARBON OILS.--Herbert W. C. Tweddle, Pittsburg, Pa.

I claim, 1st, In distilling hydrocarbon oils, vaporizing the oil by causing it to flow in a thin film or layer over the surfaces of a series of heated pipes in a vacuum still, with or without the application of superheated steam, substantially as above described.

2d, The application of the process of distillation, hereinbefore described, to the re-distillation of fire-distilled oils, for the purpose of producing an oil similar to the refined oil of commerce, substantially as above set forth.

3d, Securing a continuous and complete distillation of hydrocarbon oils by causing the oil to flow over the surfaces of a succession of heated pipes in different vacuum stills, the temperature of such pipes increasing in each successive still, so as to drive off at first more volatile ingredients, and then those less so, and so on till only the residuum remains, substantially as hereinbefore described.

72,127.--GRAIN DRILL.--Joseph G. Yale, Cumberland Co, Pa.

I claim the quarti-elliptical shovel, B, with its base, E E', coming to a point at E, the rod, C, the rod, H, with thereon the balls, D and D', together with the funnel, A, all constructed and operating in the manner and for the purpose described.

72,128.--WINDOW-SASH STOP.--George R. Vanderbilt (assigner to himself, J. J. Lindstrom, and D. W. Stidolph), Mount Vernon, N.Y.

I claim, 1st, The two clamping plates, and the tightening bolt, combined and operated substantially as and for the purpose specified.

2d, The springs, arranged in relation to the plates, c d, substantially as and for the purpose specified.

72,129.--MUSICAL INSTRUMENTS.--George W. van Dusen, Williamsburg, N.Y.

I claim the combination and arrangement of lever, V, with finger piece, Y, at one end and stud, b, at the other valve, G, and air passage, E, closed by a flexible diaphragm, K, substantially as herein described, and for the purpose of producing, by means of air, an action upon any suitable sound-producing mechanism through the movement of a sheet or strip perforated, or in any other eqivalent manner prepared.

72,130.--WATER INDICATOR FOR BOILERS.--Andreas Vang, Chicago, Ill.

I claim the arrangement of the globe, a, arm, b, cylinder, c, indicator, f, and whistle, g, substantially as herein set forth.

72,131.--HORSE HAY FORK.--Oliver Vanorman, Ripon, Wis.

I claim the arrangement of the fork heads, B B', in the frame, A, and with the arms, C C', rollers, e e, and cords, D D, as and for the purpose set forth.

72,132.--WASHING MACHINE.--Lewis Vaughan, Rapids, O.

I claim the adjustable bottom, B, and spring lever, I, as arranged in combination with the roller, C, in the manner substantially as described.

72,133.--HAY RAKER AND LOADER.--Albert Vose, Pittsfield, assignor to himself and Ambros S. Vose, Randolph, Vt.

I claim, 1st, the fork arm, b, hinged or pivoted to the frame in line with the axle, and operated by means of friction blocks, as described.

2d, The friction blocks, d, in combination with fork arm, b, and eccentric levers, e, arranged as described.

3d, The fork arms, b, in combination with the freely-swiveling fork bar, o, operated as described.

4th, The forks, q, pivoted in swiveling bar, o, and operated by means of levers, v, and rods, cords, or chains, substantially as described.

5th, The levers, v, mounted on fork bars or arms, b, in combination with the fork, q, substantially as described.

6th, The combination of forks, q, spring, t, chains, w, and levers, v, with the fork arm, b, substantially as and for the purpose set forth.

7th, The means for opening and closing the lifting forks in combination with a means for operating the friction blocks, or their equivalent, whereby they are operated simultaneously, as described.

8th, The lever, e, for closing the forks and applying the friction blocks, as described, in combition with the arms, g, for releasing the same as described.

9th, The extension, x, of the pivoted fork bars, b, in combination with cords or chains, 5, operating as described.

10th, The curved or semicircular rake head, or its equivalent, arranged in rear of and operated in connection with the lifting fork, substantially as described.

72,134.--WASHING MACHINE.--George E. Wade, Jefferson City, Mo.

I claim the lever, M, the spiral metal plate, F, the wash boards, A and B, corrugated as shown, and the springs, c c' c". In combination with a common wash tub, when constructed, arranged, and operating substantially as shown and specified.

72,135.--BOLT AND RIVET MACHINE.--John Wakefield, Birmingham, England, assignor to Isaac Smith and William Fothergill Bartho.

I claim, 1st, the arrangement or combination, substantially as hereinbefore described, and illustrated in the accompanying drawings, of the vertical dies, b b, for cutting off and carrying the cut-off length of rod, and for shaping the head of the rivet or bolt, with the horizontal punch or die, m, for shaping the shank of the rivet or bolt, and upsetting the end of the rivet or bolt into a head in the vertical dies.

2d, The arrangement or combination of parts hereinbefore described, and illustrated in the accompanying drawings, for giving motion to the said vertical dies, b b, and horizontal punch or die, m.

3d, The arrangement or combination of parts hereinbefore described and illustrated in the accompanying drawings, for removing the finished rivet or bolt from the horizontal punch or die.

72,136.--EGG BEATER.--Dudley Webster, Washington, D. C.

I claim as a new article of manufacture an egg-beater spoon, constructed as described, viz., with its circumference and the edges of an inner central opening serrated as and for the purpose described.

72,137.--BRICK MACHINE.--P.V.Westfall, Kalamazoo, Mich.

I claim, 1st, the combination of the two molding cylinders, C C, when the molding recesses, I I, in said cylinders, and their intermediate followers, J J, are so proportioned with each other that the faces of the said followers cannot be brought in contact with each other, and when the said follower pieces have substantially the degree of curvature herein represented and described.

2d, In connection with the molding cylinders, C C, I also claim the central shaft, b, and its operating levers, L L, in combination with the jointed rods, n n, and the crank arms, m m, on the respective cam shafts, for operating all the cams simultaneously, substantially in the manner herein set forth.

3d, Also the vibrating spring scraper, i, in combination with the wire cloth belt, w, when arranged with the molding cylinders, C C, and operated substantially in the manner and for the purpose herein set forth.

72,138.--APPARATUS FOR ENAMELING PHOTOGRAPHIC PICTURES.--Nathaniel Weston, San Francisco, Cal.

I claim the rest, A, for the glass, or its equivalent, the use of the glasses, B B, the weight G, the fastenings, H, the clamps, E E, or their equivalents, in combination, for the purposes, herein set forth.

72,139.--VALVE GEAR FOR STEAM ENGINES.--Norman W. Wheeler, Brooklyn, N.Y.

I claim, 1st, Opening the ports, as i' i" so as to suspend the operation of the moving force upon the valve or valves at the period when the steam is cut off, and before the exhaust is opened, substantially as and for the purpose herein set forth.

2d, Also the closure of certain ports, as i' i" and k' k", so as to cause the valve or valves to resume the movement toward its or their full throw at the proper period, substantially as and for the purposes herein set forth.

3d, Also opening the proper ports, as h' h, so as to suspend the moving force operating upon the valve or valves, when they or it have reached the proper limit of throw, substantially as and for the purposes herein set forth.

4th, Also regulating the times of closing passages, so as to induce the cutting-off movement of the valve or valves, at variable periods, substantially in the manner and for the purposes herein set forth.

5th, Also changing a continuous reciprocating motion derived from an eccentric, or equivalent moving part of the engine, to an intermittent reciprocating motion, by means of a hydraulic apparatus as hereinbefore described, substantially in the manner and for the purpose herein set forth.

72,140.--DITCHING MACHINE.--A.H.Whitacre and T.S.Whitacre, Morrow, Ohio.

We claim, 1st, The combination of the sled, A, and the frame, B, connected by the racks and pinions, c a, at the corners, arranged and operating substantially as and for the purpose described.

2d, The pulleys, D and E, carrying the endles chain, g, with the scoops, h h, in combination, with the drum, C, the plungers, n n, operating by the double incline, p, around the wheel, K, and the sweep, F, constructed and operating substantially as and for the purpose herein described.

72,141.--FARM FENCE.--Samuel P. Williams, Sheridan, N.Y.

I claim the application and use of the triangular brace posts, B B, and tie-rod, C, in the construction of farm fences, in the manner substantially as described.

72,142.--VENTILATING TUNNEL.--Hugh B. Wilson, N.Y. city.

I claim, 1st, The method of applying street lamp posts, and awning and other useful or ornamental posts, pillars, or structures, to the purposes of ventilating underground railway tunnels, substantially as within described.

2d. Also the combination of street lamp posts, and awning and other posts, pillars, or structures, whether for ornament or use, with the connecting tubes of such railway tunnels, substantially in manner set forth.

72,143.--MEDICAL COMPOUND.--J.T. Wilson, Brooklyn, N.Y.

I claim the combination of the above-named ingredients in the manner as and for the purpose described.

72,144.--SHOE LIFTER.--Wm.H. Winans, Newark, N.J.

I claim, 1st, The combination of the lever plate, A, griping plate, B, spring, b, and holding level, C, substantially as and for the purpose specified.

2d, The teeth or studs, a', provided upon the inner surface of the griping plate B, and arranged in relation with the back of the plate, A, substantially as and for the purpose specified.

72,145.--STOVE.--T.W.Wisner, Howell, Mich.

I claim the portable hop-drying stove, constructed as described, of the corrugated side and end plates, A, supported upon the ash pan, B, extending the entire length of the stove, and mounted upon wheels, the adjustable grate placed at b, in the center of the stove, and the boiler, all arranged as described for the purpose specified.

72,146.--PAPER FILE.--John Wolfe, Washington, D. C.

I claim the paper file or holder constructed and operated as herein recited.

72,147.--LATHE BOX AND JOURNAL.--Aurin Wood, Worcester, Mass.

I claim, 1st, The combination and relative arrangement of the oil box, B, and grove, a, and inclined oil passage, e, formed in the bottom part, A, of the journal box, substantially in the manner and for the purpose herein shown and specified.

The combination of the journal, C, having the peculiarly shaped grooves, d d, cut in its surface, with the journal box, D, provided in its lower part with the oil box, inclined oil passage, and groove, a, under the arrangement substantially as herein shown and set forth.

72,148.--LATHE FOR TURNING SHAFTING.--Aurin Wood, Worcester, Mass.

I claim, 1st, The combination with the bed of the lathe, provided with a reservoir or receptacle, as described, of the sliding tool carriage and the pump, attached to and moving with said carriage, substantially as and for the purposes shown and set forth.

2d, The combination with the sliding tool carriage and pump, mounted upon said carriage, of the cup, C, and tube connecting said cup with the pump, substantially in the manner and for the purposes herein shown and described.

3d, The method of operating the pump by connecting the piston rod of the same with a friction wheel, actuated by the rotation of the shaft which is being turned in the machine, in the manner herein shown and specified.

72,149.--FINGER BAR FOR HARVESTER.--Walter A. Wood, Hoosick Falls, N.Y.

I claim, bevelling off the front upper corner of the finger bar, to afford a seat for the sickle or scythe bar, to vibrate upon, in combination with beveling off the lower side of the finger bar, for the reception of the guard finger.

72,150.--CURTAIN FIXTURE.--William H. Woods, Philadelphia, Pa.

I claim the lever dog, e, with the cross foot, e, engaging and disengaging the teeth of the rack, b b, in combination with the swivelled knob, d, having a cross bar, g, and working in the slot, a a, of the racket case, A, substantially as and for the purpose herein described.

72,151.--CHIMNEY.--Ebenezer S. Phelps, Jr., Wyanet, Ill.

I claim the device above described, consisting of the iron box, A, and drawer, B, constructed and arranged as shown, when used in combination with the chimney, D, substantially in the manner and for the purposes specified.

* * * * *

REISSUES.

62,057.--BRICK MACHINE.--Philip H. Kells, Adrian, Mich. Dated March 19,1867. Reissue 2,810.

I claim, 1st, The combination of the annular mold bed, B, and the central hub or support, C, substantially as described and represented.