Chapter VI: MISCELLANEOUS.--Geological Notes.--A Geological Congress.--The (2)

For war purposes, the hemi-plunger is especially adapted, because the vulnerable portions, engines, boiler, rudder, etc., are wholly out of the reach of shot. Guns are mounted on the platform, which thus becomes a circular or elliptical turret, just above the water when the vessel is in fighting trim. Instead of steel armor, M. Tommasi has a new invention which he calls hydro-metallic plating. He reserves the details of this for future publication; but generally the armor consists of tubes in which liquid is forced under a pressure equivalent to the resistance, say, of forged steel. He thinks this will oppose shot as effectually as the solid metal, and will have the additional advantage of superior lightness.

* * * * *

IN-SOLES saturated with salicylic acid have been introduced as a remedy for perspiration of the feet.

* * * * *

SUPREME COURT PATENT DECISION.

A United States patent was granted May 23, 1854, to John Myers and Robert G. Eunson for a wood-sawing machine for cutting boards into thin stuff for making picture frame and mirror backs. One of the principal claims was for the employment of two deflecting plates, one on each side of the circular saw, by which both sides of the sawed stuff, as fast as it was cut, was slightly deflected so as not to bind upon the saw. Suit was brought by the patentee against Dunbar and Hopper for infringement, and judgment was given in favor of the patentees, in the United States Circuit Court, this city, the damages awarded being $9,121. The defendants thereupon took an appeal to the Supreme Court of the United States, which tribunal has reversed the finding of the Circuit Court and dismissed the complaint. It was held by the Supreme Court that, inasmuch as the use of a single deflecting plate was old, well known, and in common use, it was simply an exercise of ordinary mechanical skill, and not a patentable invention, to employ a second deflecting plate, although the superiority of the double deflectors, for certain kinds of work, appears to be conceded.

* * * * *

PLANING MILL MACHINERY.

The planing machine, next to the saw, is perhaps the most important agent for the conversion and manipulation of wood in use; and before proceeding to consider it, in its present form, says the author of this article, Mr. F.H. Morse, in the _Northwestern Lumberman_, it may not be out of place to notice briefly its origin and history.

The first man to employ power in the operation of smoothing the surface of wood was Sir Samuel Bentham, of London, England, and to him belongs the honor of having discovered the principle upon which all planing machines operate. A brief personal notice of this remarkable inventor will serve to show under what circumstances the planing machine originated. His education was secured at the Westminster school of London, and, as far as can be ascertained from the meager records of his life that have come down to us, was of the most thorough kind, both classical and scientific, that could be obtained at that time (1770). When his education was finished, he was bound to the master shipwright of the Woolwich dockyard, to whom he served an apprenticeship of seven years, acquiring in that time a practical knowledge of the methods of working in both wood and iron then in vogue, and receiving the best scientific instruction that the development of that period afforded. After his term of apprenticeship had expired, he spent about two years in looking up the local peculiarities of other shipyards whose methods of working differed in some respects from those of the Woolwich mechanics.

In 1779 he was ordered by the government to examine into the progress of shipbuilding in Northern Europe, and in carrying out this commission he repaired to Russia, where he invented the first machine for planing wood. Its mode of operation, whether reciprocating or rotating, it is impossible to ascertain positively, but the conclusion arrived at, after referring to the specifications of his first patent, which was issued in 1791, is that it worked upon the former principle by means closely analogous to the operation of planing by hand. He seems to have made no use of his venture in Russia, though he resided there several years and filled several important positions under the Russian Government. He returned to his native country in 1791 and joined his brother, Jeremy Bentham, who had at that time just received an appointment from the government to introduce industrial prisons in England. To utilize the unskilled labor of the convicts, the talents of Sir Samuel were called into use, and he devised a number of new machines, the greater part of which were for working wood. For want of a more suitable place, these machines were constructed at the residence of Jeremy Bentham, which was thus converted into the first manufactory for woodworking machines. This factory was established in 1794, but was soon found to be too small for the purpose, and another building was occupied. In a lecture before the Society of Arts, in 1853, Professor Willis, referring to the shops of the Benthams, stated that "there were constructed machines for all general operations in woodwork, including planing, molding, rebating, grooving, mortising, and sawing, both in coarse and fine work, in curved, winding, and transverse directions, and shaping wood in complicated forms; and further, as an example, that all parts of a highly finished window sash are prepared, also all parts of an ornamented carriage wheel were made so that nothing remained to be done by hand but to put the component parts together."

In 1797 the Admiralty consented to the introduction of such of these machines as could be used to advantage in the different dockyards, and they were manufactured under the direction of Jeremy Bentham, and forwarded from time to time to Portsmouth and Plymouth, where they were used with good results, performing all that was claimed for them.

Bentham was joined in 1810 by another genius (formerly in the employ of the brothers) by the name of Brunel, who had invented several valuable machines, among which was one for shaping block shells, which seems to have had Bentham's indorsement. As Inspector General, in 1803, Sir Samuel advised the Admiralty to introduce many of his new machines, and also to permit the use of steam engines; accordingly, the dockyards were fitted with engines for sawing, planing, boring, tenoning, mortising, etc. The labor saved by their use can be inferred from the fact that Brunel, who had assisted in their construction, received as a premium for his inventions the amount saved in the yards by their use in one year, which reached the respectable sum of $80,000. In the same year the government settled with Jeremy Bentham, after arbitration, and allowed him for machines furnished the yards and prisons, $100,000. We learn from testimony given before the arbitrators that "Sir Samuel Bentham prepared a system of machinery for the employment of men without skill, and particularly with a view to utilizing convict labor. In 1793 patents were taken out on these inventions to secure their exclusive use for the prisons." The testimony states that no skill was required in the use of these machines; they were introduced into the dockyards and worked by common laborers. It was claimed that nine tenths of the labor was saved by the use of Bentham's machines, which proves that they were at least effective, which cannot be said in all cases of those of modern manufacture.

The patent of Bentham, issued in 1793, is doubtless one of the most remarkable ones ever issued, both for the importance of the inventions it protected and the clearness with which they and the principles on which they operated are described. Richards, in referring to that section of this patent which relates to rotary tools for woodcutting, quotes the inventor as saying: "The idea of adapting the rotative motion of a tool with more or less advantage, to give all sorts of substances any shape that may be required, is my own, and, as I believe, entirely new."

For those not skilled in nor acquainted with the nature and extent of the various operations in wood conversion which come under the head of shaping with rotary cutters, it will be difficult to convey an idea of the invention here set forth; it includes, indeed, nearly all operations in woodworking, and as an original invention may be said to consist in the discovery of the fact that flat surfaces, or surfaces of any contour, can be properly prepared by the action of rotating tools. It is not to be wondered at that such an operation should not have been sooner discovered, for even at the present time there are few processes in treating material which seem so anomalous as that of planing a flat surface with cutters revolving in a circle of a few inches in diameter.

In reference to planing mouldings, it is said: "If the circumference of a circular cutter be formed in the shape of any moulding, and projecting above the bench no more than necessary, the piece being shoved over the cutter will thus be cut to a moulding corresponding to the cutter--that is, the reverse of it, just as a plane iron cuts the reverse. If a plane cutter, such as that above spoken of for cutting a groove in the breadth of a piece, be made so thick, or, as we might be apt to say now, so broad, or so long, as to cover the whole breadth of the piece, it will present the idea of a roller. This I call a cutting roller; it maybe employed in many cases with great advantage to perform the office of a plane."

The cutting roller of Bentham is the present cutter block of England, or the cutting cylinder of America, and after what has been quoted it may be seen that the idea of rotary planing and moulding machines had been fully grasped by Bentham. He goes on as usual to the various conditions which attach to the process of planing, and says further: "if a cutting roller of this sort be placed with its axis horizontal and the bench beneath, it may be made to rise and lower. The bench (machine) may be very readily adjusted, so as to determine the thickness to which a piece will be reduced by being passed under the roller." "To gain time, cutters may be applied to different sides of a piece at once, and such of them as make parallel cuts may be mounted on the same spindle."

These extracts would not be out of place in an explanatory lecture or essay on woodcutting at the present day, and cannot help awakening surprise that they should have been written eighty-three years ago, when there had, so far as we know, been no precedents, nor even suggestions from previous practice.

The foregoing shows that nearly all the fundamental principles, upon which woodcutting by machinery in its present development depends, were familiar to Sir Samuel Bentham, and though his name has been almost forgotten, it may be safely asserted that he gave to the world more useful inventions than any other man of his age. His work shows throughout a constant method and system of reasoning, which point rather to a life of persistent labor than to one of what would ordinarily be called genius. That latter quality he must certainly have possessed in the highest degree, for without it even his knowledge and experience could not have been equal to the work he accomplished. Directed to different ends, his talent and genius would doubtless have secured for him a fame that would live for years, though it does not seem possible that he could have conferred upon the world a greater benefit.

* * * * *

SUICIDE STATISTICS.

A curious and suggestive table of statistics has recently appeared in France, which will doubtless prove of much value in the hands of students of psychology and nervous mental ailments. It relates to suicides; and the conditions, etc., of the people who made away with themselves in 1874 in France are taken as the basis of the figures. In that year, 5,617 suicides occurred, the largest number ever known in any one year in the country. Of these, 4,435, or 79 per cent., were committed by men, 1,182, or 21 per cent., by women. In spite of the careful investigations of the police, the ages of 105 people could be determined. The 5,512 others are divided as follows: 16 years, 29; between 16 and 21 years, 193; between 21 and 40 years, 1,477; between 40 and 60 years, 2,214; exceeding the last mentioned age, 1,599. About 36 per cent. of these unfortunates were unmarried, 48 per cent. married, and 16 per cent. widowers. Of those which constituted the last two classes, nearly two thirds had children. More than seven tenths of the suicides were effected by strangulation or drowning. The crime was most frequently committed during spring, when 31 per cent. of the whole number destroyed themselves; during other seasons the percentages were: in summer, 27; in winter, 23; in autumn, 19.

Included in the tables are the results of the judicial inquests, showing the professions and callings of the deceased. About 33 per cent. were farmers, 30 per cent. mechanics, 4 per cent. merchants or business men, 16 per cent. members of the liberal professions, 4 per cent. servants, and 13 percent. were destitute of any calling. The table even analyzes, in all but 481 people, the motives which caused the fatal act. Thus we are told that 652 killed themselves because of reverses in fortune, 701 through family troubles, 572 through drunkenness, 243 through love, debauchery, etc.; 798 died to avoid physical suffering, 59 to avoid the penalties of capital crimes, 489 for unclassified troubles, and 1,622 were clearly shown to have been afflicted with some mental disease.

* * * * *

COMMUNICATIONS.

* * * * *

THE FROST PLANT OF RUSSIA.

_To the Editor of the Scientific American:_

Mr. Charles Williams, of Winoa, Ohio, has written a letter to that veteran botanist, Humphrey Marshall, of Chester county, Pa., on the subject of the abovenamed plant, and my opinion concerning it has been asked for. Seeds of this plant were obtained by citizens of Boston, who had snow brought from the White Mountains and from the coast of Labrador, and who stated that they have "now the most unbounded satisfaction and pleasure of announcing that all signs are favorable to the realization of their fondest hopes." This wonderful plant, it seems, was found amid the perpetual snows of the northern boundaries of Siberia, in 1863, by Count Swinoskoff, the eminent Russian botanist, and it was by him cultivated at St. Petersburgh. The account sent me is very vague, and is evidently not from the pen of a botanist. It is stated that it comes forth on the first day of the year, grows to the height of three feet, and flowers on the third day. It continues in bloom for twenty-four hours, then dissolves itself, being of the finest snow; it has a stalk one inch in diameter, and leaves, three in number, 1½ inches wide, covered with infinitesimal frost or snow cones. The flower is of the shape of a star, with petals 3 inches long and ½ inch wide at the broadest part, forming a basketwork of frost. The seeds are like a pin's head. This is about all that can be gleaned from the description, and is by no means satisfactory. Allow me to present my humble views of an analogous discovery of frostwork on December 6, 1856, in a sandy loam in Chester county, Pa., near the Paoli monument. In the _Horticultural Journal_ of Philadelphia, then edited by J. Jay Smith (New Series, volume vii., page 73, 1857), an account was published of my observations then. These I have since more fully confirmed. The common dittany (cunila Mariana) is frequently met with in December, with the base of the stem surrounded with shellwork of ice, of a pearly whiteness. Dr. Darlington, in his "Flora Cestrica" published in 1853, page 199, under the article cunila, observes: "In the beginning of winter, after a rain, very curious ribbons of ice may be observed, attached to the base of the stems, produced, I presume, by the moisture of the earth rising in the dead stems by capillary attraction, and then being gradually forced out horizontally, through a slit, by the process of freezing. The same phenomenon has been observed in other plants. See observations on _helianthemum_, page 27." Had the doctor given a more extended investigation, I fancy he would have agreed with me as to the cause. I found hundreds of diversified specimens. I am not aware that it was after a rain, but I took up a number of the plants, and always found a vigorous scaly root bud, undergoing development at this early season under ground, to produce a new stem the following spring. I came to the conclusion that, as the temperature was below freezing and snow was on the ground, the expanding bud, in close proximity to the surface, gave out sufficient caloric or warmth to generate vapor from the moist soil. This vapor rising around the stem of the plant, and attracted by it, becomes congealed into what we term hoar-frost, in numerous forms; some like shellwork, others like tulips, with radiated petals, variously contorted, and often as symmetrical as snowflake crystals.

That plants in germinating have the power of generating heat was proved by Mr. Hunter and by Lamarck. Experiments of Hales and Du Hamel show that vegetation is not wholly suspended, however cold it may be; and that there is a regular and gradual progress till the returning warmth of spring gives a greater degree of velocity to the juices, rendering their development more vigorous and apparent. If the crystallization takes place when the air is calm, the crystals will be regularly formed; otherwise, when windy, I have seen them like a shell within a shell, very thin, of a pearly whiteness. Professor Tyndall has shown in a very beautiful manner that ice is but an agglomeration of snow crystals: the transparency of the former being due to the expulsion of the air, entrapped in and causing the whiteness and opacity of the latter. There is a formation called the snow plant of California, which arises to some height, and has been compared to various things, a fountain convoluted and enlarged above, a crystallized small bushy shrub, etc.; but on closer inquiry, I have failed as yet to get any definite ideas to its true character. Some bulbs in the soil might cause such formations by the congelation of vapor deposited successively upon itself, or the stems of the previous year's growth yet remaining, and thus give them a sheathing of frosting.

The shape of a star is common in snow crystals, which we all know assume the most beautiful forms, and which are illustrated in various publications. The eminent botanist Count Swinoskoff should give us some clue as to the genus or character of the plant, the flower of which, we are told, melted away on being touched, and as to the stamens, the diamond seeds like a pin's head, etc. The whole needs further explanation.

I trust those Bostonians who are in such hope will edify the public as to the final result of their experiment. What has that veteran in botany, Dr. Asa Gray, to say about it? Let some one well qualified tell us more about this frost flower of Russia.

J. Stauffer.
Lancaster, Pa.

* * * * *

PATENT MATTERS IN WASHINGTON, D.C.

_To the Editor of the Scientific American:_

From the report of the Commissioner of Patents, just issued, it appears that its surplus revenue for the past year amounts to over one hundred and five thousand dollars, and that there is nearly a million dollars in the United States Treasury to the credit of the Patent Office; and yet, notwithstanding that this enormous amount is lying idle, our pseudo-economists at the Capitol refuse to grant the Office sufficient of its own funds to carry on its business promptly. So much is the work behindhand in some of the departments that, as the Commissioner states in his report, some of the attorneys who require certified copies of papers have been obliged to employ their own clerks to do office copying, and then had to pay the full legal rate of ten cents per hundred words, the same as though the Office had done the work. This style of _economizing_, by making inventors pay two prices for their work, may be "reform" in the eyes of the average Democratic Congressman; but speaking for myself, as one of those who have had to pay twice, I would prefer to dispense with this style of "retrenchment and reform," and therefore ask you, Messrs. Editors, in behalf of the inventors of the United States, to so stir up our legislators that they will allow the Office sufficient of its own funds to do its work properly, and not delay the work of the inventor--work that he has to pay for in advance--and so prevent the discouragement and trouble which these delays always cause.

As the Patent Office has been doing a good business lately, there appears to be some attempt at rivalry at the Capitol, as the following list of applications for extension will show:

LIST OF APPLICANTS FOR EXTENSIONS OF PATENTS NOW BEFORE CONGRESS.

---- Reynolds, power loom brake.
Strong & Ross, scales.
Wm. & W.H. Lewis, photographic plates.
T.A. Weston, differential pulley.
S.S. Hartshorn, buckles.
H.A. Stone, making cheese.
N. Whitehall, cultivator.
J.R. Harrington, carpet lining.
H.L. Emery, cotton gins.
J. Stainthorp, moulding candles.
Walter Hunt's heirs, paper collars.
A.B. Wilson, sewing machines.
S.A. Knox, plows.
Rollin White, firearms.
Aikin A. Felthousen, sewing machines.
H. Woodman, stripping cotton cards.
L. Hall, heel trimmer.
J.A. Conover, wood splitter.
J. Dyson, carding engine.
G. Wellmann, card strippers.
E. Brady, safety valves.
Jearum Atkins, harvester rakes.
John Thomas, re-rolling railroad rails.
Thomas Mitchell, hair brushes.
Stephen Hull, harvesters.
T.R. Crosby, wiring blind slats.
G.W. Laban, mitre cutting machine.
T.A. Whitenack, harvesters.
J.J. Vinton, furnaces.
A. Fuller, faucets.
D. Baker, pitcher spouts and lids.
G.F. Chandler, refining sugar.
G.H. Nott, boiler furnace.
William Hall, lightning rods.
B.F. Rice, paper bag machines.
S.D. Nelson, shovels.
E.T. Russell, car springs.
Hubbell & Conant, steam pumps.
C.A. Chamberlain, shovels.
C.A. Adams, locks.
E.A. Leland, paint can.

In addition to the above, I find the following names as applicants for extensions, but the inventions covered by the patents sought to be extended is not mentioned: S.S. Turner, Arculous Wyckoff, De Witt C. Cummings, Moses Marshall, J.W. Fowler, and Holloway & Graham. Many of the applicants have apparently given up their cases for this session, but they may be only lying back to its close in hopes that in the final rush their "little bills" may slip through easily.

Several bills tinkering at the patent laws are before Congress, and one of these (House Bill, No. 3,370) passed the House on the 30th ult. It has one section that may be made to work great harm to inventors, as it prevents infringers being sued for more than one year's damages previous to notice of infringement being given. By this bill, if it is allowed to become a law, a person will be able to build and use patented machines or processes for years in some out of the way place where the inventor cannot easily find him; and should he be discovered, he can only be sued for one year's damages. There are other sections in this bill which will bear ventilating.

Another bill, introduced into the Senate by Mr. Paddock, provides that all appeals from the Board of Appeals shall be direct to the Supreme Court of the District of Columbia, instead of to the Commissioner as heretofore; and that the fees shall be the same as now paid to the latter official.

Mr. Sampson has introduced into the House a bill changing section 4886 so that it shall read as follows: "SEC. 4886. Any person who has discovered any new or useful art, machine, manufacture or composition of matter, or any new or useful improvement thereof, not known or used by others in this country, and not patented or described in any printed publication in this or any foreign country, before his invention or discovery thereof, and not in public use or on sale for more than two years prior to his application, unless the same is proved to have been abandoned, may, upon payment of the fees required by law, and other due proceedings had, obtain a patent therefor: _Provided, That the manufacture or composition of drugs as a medicine shall not be patentable_." The change is the addition of the words in italics.

The Smithsonian Institute has sent to Congress a memorial setting forth that the present Institute building is already too small for the vast amount of articles already placed there on exhibition; that at the late Centennial Exposition the Commissioners of various countries presented their entire collection of exhibits to the United States, which had delegated their care to the Smithsonian Institute, and they had no place for them; that the armory building was being fitted up for the reception of the United States Centennial collection, and they therefore asked that a building be erected for the foreign collection, which could be used as a national museum, or otherwise we should have to offend the donors by keeping their valuable gifts stowed away in cellars and other rubbish receptacles.

Mr. Eads, who is now here on the lookout for his pay for his work on the South Pass of the Mississippi's mouth, has received intelligence from the resident engineer at the jetties that the channel through the shoal at the head of the South Pass is now twenty-two feet deep, and that the least width at which twenty feet depth is found is one hundred and ten feet. The principal works to improve this shoal were constructed during the last six months. The low stage and feeble current of the river has delayed their effect until the recent flood from the Ohio reached them, and the problem of deepening the shoal has been fully solved by the rapid scouring away of the obstruction. It is stated that the channel is quite straight and is deepening rapidly. The channel through the jetties at the mouth of the Pass is twenty-one feet deep. The entrance from the sea through the jetties is one thousand feet wide, and through the works at the head of the Pass eight hundred feet.

A recent telegram from Nevada states that the Sutro Tunnel (of which I gave you some particulars in one of my letters) has now progressed a total distance of 15,565 feet and has fairly entered the mineral belt, and will soon help to increase the already vast products of the Comstock lode.

While on the subject of mining, I will state that the amount of quicksilver produced in California has increased so immensely during the last two years that it has attracted the attention of all interested in the article throughout the world. The receipts for the year have been 63,928 and the exports 48,010 flasks. In addition to the receipts there, probably about six thousand flasks were shipped direct from the mines to Nevada, thus bringing up the total production to over 70,000 flasks, a gain in round numbers of from twelve thousand to fifteen thousand flasks over 1875. The exports in that year were 34,844 flasks, or 13,666 less than in 1876.

Occasional.

* * * * *

TYRIAN PURPLE INK FOR MARKING LINEN.--Von Bele gives the following method for preparing an ink for marking linen and cotton: Neutralize 75 grains of carbonate of ammonia with pure nitric acid, and triturate 45 to 60 grains of carmine with the solution. Mordant the fabric with a mixed solution of acetate of alumina and tin salt, and write upon it, when it is perfectly dry, with the ink.

* * * * *

NEW YORK ACADEMY OF SCIENCES.

On Monday evening, January 29, 1877, a meeting of this Academy was held at the School of Mines, Columbia College, Dr. J.S. Newberry, President, in the chair. Mr. A.A. Julian, A.M., read a paper on the

PREPARATION OF ROCK AND MINERAL SECTIONS FOR MICROSCOPIC STUDY.

The speaker described in detail the various operations, exhibited the different kinds of apparatus employed, showed the operations, and exhibited the finished sections. In some rocks a thin chip can be broken off, others require to be sawn, and for the latter purpose the diamond saw is best. Having obtained the chip, it is first polished on one side, then cemented to a little square of glass, and the other side polished in the same way. The sections must not be too thick, nor too thin; they are usually made from a hundredth to a thousandth of an inch thick. Lathes employed in polishing minerals require to be provided with conical spindles, so that the wear, due to grit and emery dust getting on them, may be readily taken up. The grinding wheel may be either horizontal or vertical; the former has the advantage that the mineral can be held in either hand; with the latter only the right hand can be employed, and that in an awkward and tiresome position. Mr. Julian then referred briefly to the kinds of emery, its preparation by elutriation, etc., and cautioned operators against using rouge or tin putty powder in polishing rock sections, although they may be employed in polishing certain minerals and gems. The object of making the rock sections being to study their constituents and determine what minerals enter into their composition, it is important that no foreign substance, liable to adhere to the specimen and to be mistaken for one of its ingredients, be placed on the section while grinding. Lastly, the minerals are mounted on glass, with or without covers, by means of Canada balsam. Square glasses are to be preferred to the long and narrow strips, usually employed, as less liable to break in the center, and more easily revolved on the stage of a microscope.

Mr. L.H. Landy then exhibited, by means of the gas microscope, several beautiful rock sections, both American and German. The same gentleman also showed the effect of passing polarized light through certain crystal sections, the black cross and rainbow-hued rings revolving like so many wheels as the polarizer was turned.

At the conclusion of this brilliant exhibition, Dr. P.T. Austen made some remarks on

LABORATORY MANIPULATIONS.

The points referred to were the apparently unimportant details which often contribute so much to the ease and pleasure of working. First, the use of square pieces of felt, such as are used under beer glasses in saloons, for setting hot beakers and flasks on to prevent chilling and consequent cracking. Second, in crystallizing substances for examination under the microscope; one watch glass is placed upon another with the substance between them, and the upper glass filled with ether, the cold produced by its evaporation hastening the crystallization. Third, removing precipitates and solid matter from flasks, by heating to boiling, and inverting in a vessel of water. Fourth, crystallization by gradual dilution. Fifth, filter paper without ash. In German laboratories it is customary to dissolve out the mineral matter from white filtering paper by washing in dilute hydrochloric and hydrofluoric acids. Sixth, the use of infusorial silica for drying purposes. Being very porous, it will absorb five times its own volume of water. If a filter paper, holding a wet precipitate, be placed upon a layer of this earth, it will become quite dry in a very short space of time. Mr. Austen also remarked that substances retain their heat for several days when placed in cork boxes. To keep a substance air-tight, it may be placed in a flask, the neck painted with a solution of india rubber in chloroform, and a plate of glass laid upon it. The solvent quickly evaporates, leaving a delicate film of rubber, which holds the glass tightly in place.

The next meeting of the Chemical Section will be held February 12; of the Mineralogical Section, February 19.

* * * * *

ANNUAL REPORT OF THE PATENT OFFICE.

The annual report to Congress of the Commissioner of Patents, for the year 1876, has made its appearance.

The amount received on applications for patents, reissues, designs, extensions, caveats, disclaimers, appeals, trade marks, labels, copies, etc., was $757,987.65. The amount paid for salaries was $425,930; other expenses, $226,612. Total payments, $652,542.

Number of applications for patents during the year 1876 21,425
Number of patents issued, including reissues and designs 15,595
Number of applications for extension of patents 2
Number of patents extended 3
Number of caveats filed during the year 2,697
Number of patents expired during the year 814
Number of patents allowed but not issued for want of final fee 3,353
Number of applications for registering of trade marks 1,081
Number of trade marks registered 959
Number of applications for registering of labels 650
Number of labels registered 402

Of the patents granted there were to--

Citizens of the United States 16,239
Subjects of Great Britain 511
Subjects of France 104
Subjects of other foreign governments 172
-----
Total 17,026

The number of applications for patents was a little less than during the previous year. The Commissioner suggests that Congress should appropriate $50,000 to promote the printing of the old patents; that additional examiners be employed, and more clerks, for the purpose of expediting the business of the office; that the price of the Official Gazette be reduced, also the fee for trade mark registration; that the library fund be increased; that more space be provided for models, and for the transaction of business.

In respect to the Centennial, the value of new improvements, and the service of the Patent Office in stimulating discovery, the Acting Commissioner speaks as follows:

"The display made at the Exposition by the Patent Office was
creditable in every respect, and excited general attention.
About 5,000 models of inventions, representing the leading
branches of the arts and manufactures, were exhibited in
suitable cases, and properly labeled, the various publications
of the Office were displayed, its practice fully explained to
all inquirers, and copies of the Patent Laws and the Office
regulations and forms freely distributed. The knowledge of our
patent system thus imparted to foreigners and all others unable
to visit Washington has more than repaid the small cost
attendant upon the representation. The exhibits were sent from
and returned to the Office with scarcely any damage being
suffered.

"But the array of models, etc., made by the Patent Office at the
Exposition was not needed to illustrate the value of our patent
practice. The wisdom of that system was demonstrated in the most
practical and triumphant manner in nearly every branch of that
munificent enterprise. Not only in the grand display of
labor-saving machinery, but in the vast collection of
manufactured articles, and even in the department of fine arts,
were seen the fruits of that provision in our Constitution
giving to Congress the power 'to promote the progress of science
and the useful arts by securing for limited times to authors and
inventors the exclusive right to their respective writings and
discoveries.'

"Whatever persons may do in a 'perfect condition of society' in
sharing, without price, the fruits of their labors with others,
it must be apparent to the dullest observer that the wonderful
growth of the useful arts in this country is due, thus far, to
the protection given by our Government to property in
inventions--a property as sacred as any other class of property,
and whose value is determined by the same general law of supply
and demand.

"It may be safely said that two thirds of the manufacturing
interests of the country are based upon patents, and the welfare
of all such interests are intimately connected with the welfare
of the patent system. During the past seven years a larger
number of applications for patents were filed and patents
granted than during the entire seventy-eight preceding years,
reaching back to the enactment of the first patent law. The
needs of the Office have advanced in proportion to this sudden
and vast increase of work, but have been but partly supplied.
Nay, in fact, its already scanty force and accommodations have
been actually reduced at a time when most required. If these
vast interests, and the future promotion of science and the
useful arts are to be encouraged, a liberal recognition must be
made of the wants of this Office.

"The Examining Corps, the duties in which are most arduous and
exacting, comprises gentlemen of legal, as well as scientific,
attainments. It should be re-inforced by more of the same
character. They should be relieved, by legislation, of continual
embarrassment by reason of meager salaries and fears of removal
incident to merely political changes. The Office would then be
spared the continual loss of its most experienced and efficient
men."

* * * * *

THE IRON TRADE IN ENGLAND.

The British _Mercantile Gazette_ of January 15 states that the situation and prospects of the iron trade have not materially improved in the month of December, but some week or two must elapse yet before trade returns to its regular channels. In the north of England the tone of the market is tolerably cheerful, and prospects, though still vague, are considered encouraging. Makers of pig iron go into the next quarter with a good supply of orders on their books, and merchants and consumers are desirous of buying over the first half of the year. Notwithstanding the great depression which has ruled throughout 1876, there is likely to be a greater production of pig iron by several thousand tons than ever there was before, and the total make must considerably exceed two million tons, which is twice the quantity turned out in Scotland, though in the latter district a greater number of furnaces have been kept in blast. Prices are nominally the same as were quoted last week, but show an upward tendency. The bulk of the mills and forges, foundries, etc., have resumed work, and the finished iron trade is again in full swing. The plate department is well provided with orders, but the rail manufacturers, though rather better off than they were, are still in a poor position. The miscellaneous branches of the iron trade, such as the foundries and tube, wire, and cut-nail manufactories are generally well off for orders, and engineers find plenty to do. The wages agreement in the finished iron trade ends this week, but it is thought that no alteration will be made. In the South Staffordshire iron trade, work has been only partially resumed as yet, and many of the mills and forges will not be started until the quarterly meetings, next week. Orders have rarely been so scarce as they are at this moment, arrears having been pretty generally cleared off before the holidays, and no new ones coming in. Nevertheless, the feeling of the trade is more hopeful than it was a month ago. The number of furnaces in blast in this district is now only 58 out of 153; but should the expected improvement in trade arrive with the quarterly meeting, this number will soon be increased. In the finished iron branch, in which quotations for marked iron contain the basis of $45 for bars, makers of leading brands of sheets and bars are better off than the manufacturers of cheap iron, who suffer much from competition in the north. Some considerable contracts for girders, bridges, gasometers, etc., are under execution at the works devoted to constructive ironwork; but the merchant iron trade, as a whole, is very dull. Unmarked iron is weak and variable, and to this circumstance may be attributed the reduction, announced this week, in various descriptions of common iron hardware.

* * * * *

IMPROVED LATHE CHUCK.

The annexed engravings represent a new lathe chuck, which may be constructed of any size, which holds tools with great firmness, and which is provided with an improved device for taking up wear and for the separate adjustment of the jaws. The implement is made of the best steel, by special machinery, so that its parts are interchangeable.

Figs. 1 and 2 represent the chuck taken apart so as to exhibit the interior. Figs. 3 and 4 are sectional views. A is a collar which encircles the spindle, and has formed on its outer face a bevel gear wheel, B. C, Fig. 3, is the rear portion of the shell of the chuck inclosing the forward part of the collar, A. Also on said collar, A, is a washer, D, which rests against the shell, C, and a nut, E, which travels on a thread formed on the collar. As it is necessary, as will be explained further on, to turn the entire shell in order to move the jaws, the use of the nut just described is to jam the part, C, and the enlarged portion of the collar, A, tightly together, and so rigidly hold the jaws in any position in which they may be adjusted. Fig. 1 represents the outer face of the chuck with the jaws and their working mechanism. Within the chuck, each jaw has attached to it a screw, E. This enters a bevel wheel, F. As the jaws are incapable of any but radial motion, it follows that, when the chuck is rotated bodily and the bevel wheels engage on the motionless gear wheel, B, the effect of the rotation of said bevel wheels is to cause the jaws to travel toward or from the center of the chuck face. And it will be further clear that this motion must be simultaneous in all the jaws. As the outer portion of the chuck is rigidly secured to the shell, C, by screws, of course when that shell is jammed, as already stated, by the nut, E, it becomes impossible to turn the chuck bodily; and hence the bevel wheels cannot be rotated around the main gear wheel, and consequently the position of the jaws cannot be altered. The above comprises the mechanism proper of the device, that is to say, all that is necessary for moving or clamping the jaws.

There is, however, another feature of considerable importance yet to be described, and that is the device for taking up any play of the jaws due to wear, and which enables each to be adjusted so that the motion of all may be uniform. By referring to Fig. 4, it will be seen that, above the bevel wheel, there is a projection, into the threaded interior of which, as already explained, the jaw screw enters. Surrounding this projection is a sleeve, G, the outer surface of which is threaded to fit a similarly threaded aperture, cut partly in the shell and partly in the face plate. The upper portion of the sleeve is notched to receive a wrench or driver; and beneath the sleeve an armed washer, H, is slipped over the projection. The arms of this washer enter recesses in the face plate. It will be evident that, by turning the sleeve, F, so that the screw works inward, the jaw and all its appendages will be moved bodily in corresponding direction. But its movement is limited by the arms of the washer, G, which, through the narrowness of the recesses, are allowed only just enough play to compensate for slight changes in the jaw. As the above device is applied to every jaw, it follows that any one of them may be nicely adjusted from the outside, so that all are caused to grasp the tool accurately. The spindle, instead of being solid as represented, may be made hollow. Patented to J.H. Vinton, August 18, 1874. For further information, address the manufacturer, Mr. F. Armstrong, Bridgeport, Conn.

* * * * *

SCREW-CUTTING LATHES.

An English lathe, now in use at the Rogers Locomotive Works, Paterson, N.J., contains several novel features. The ways are flat on the faces, instead of having raised Vs; and this is a feature of all English lathes, and of those known in this country as the Freeland lathes. A great deal of discussion has at various times taken place as to the relative qualification or merits of these two forms of lathe bed. The advocates of the flat way, with Vs at the edges of the way, claim superiority on the score of steadiness, increased wearing surface, and strength; while, on behalf of the raised Vs, it is urged that, the Vs being true, the saddle is bound to travel true, because there can be no lost motion on the slides; whereas any lost motion, from want of adjustment of the slides in flat ways, is liable to be reproduced twofold in the work, for the reason that 1/100 of an inch lateral movement of the slide carriage becomes 1/50 of an inch in the diameter of the work. Then, again, the most of the wear upon a lathe bed takes place at the part at and near the running center of the lathe, because the saddle is, on account of short jobs, more used in that part than on any other. As a result, when wear has taken place, the saddle, if adjusted to suit the worn part, becomes too tight to travel over the unworn part of the bed; and hence, after the wear has taken place, a proper adjustment of the lathe saddle becomes impossible if the job is a long one. In the case of raised Vs, however, the wear simply causes the saddle to fall vertically, so that an amount of wear equal to 1/100 of an inch would have the same effect as lowering the tool 1/100 inch, its effect upon the work being almost imperceptible by ordinary measurement. On the other hand, however, V lathes are usually made with either a weight or a spring to keep the saddle down; and as a result, when the cutting tool stands far out from the tool post, the saddle is apt to tip, especially in the case of boring with a lathe tool. In some cases, the raised Vs are accompanied with gibs to secure the saddle; but in many instances the gibs are given too little wearing surface. In the lathe above referred to, there are three ways in one casting, with the slide angles on the outer edges. There are also three separate and independent tail stocks fitting into the two openings between the ways. The running head has one cone pulley connected by suitable gearing to three face plates. The three centers at the running head are stationary. The slide rest saddle spans the three ways, having a V slide which contains three separate slide rests, all connected by a nut to the feed screw, so that all three are operated by the one screw. In addition to this, the two back slide rests have the nuts so attached that they can be moved by means of a separate screw, the object being to facilitate setting the cuts, since it would be a tedious matter to set all three tools to an equal cut, or to their desired respective cuts, without means of operating two of them independently. To set the cut during screw-cutting operations, the ingenious device shown in our engraving is provided. A represents the cross-feed or slide rest screw, which operates the three slide rests. It is fast to the notched wheel, B, and is operated by it in the usual way. C is a short screw which provides journal bearing for the screw, A, by a plain hole. It is screwed on the outside, and the plate in which it fits acts as its nut. It is fast to the handle, D, and is in fact operated by it. The handle or lever is provided with a catch, E, pivoted in the enclosed box, F, which also contains a means of detaining the catch in the notches of the wheel, or of holding it free from the same when it is placed clear. If, then, the lever, D, be moved back and forth the feed screw, A, and hence the three slide rests, will be operated; while, if the catch be placed in one of the notches on the wheel, B, both the screws, A and C, will act to operate the rests. When, therefore, the operator is cutting screws, he sets the catch, E, into one of the notches so soon as the tools are properly adjusted to the work; and then lifting the catch, E, he turns the wheel, B, so that the catch falls into the next notch, and this puts the cut on. When the tool has taken that cut, and while the latter saddle is traveling back, the catch is placed in the next notch, and so on, the cut for the forward travel always being put on as above while the saddle is traveling back. Thus is insured an exactly equable amount of cut on the whole three rests. When the lever, D, is not in use, the catch is removed from the wheel, B, and is allowed to rest against the pins, G or A, provided for that purpose. For piston rods, or for work such as cutting jack screws, this lathe is very useful. It is obviously, however, a special tool.

* * * * *

NATURAL ORNAMENTS IN WINTER.

Now that the hedges are no longer green, and the trees stand black and bare on the landscape, is the time to seek for endless variety and beauty waiting to be admired in its turn. What miniature fairy glens and grottoes are distributed over the hedge banks of our country lanes! Mosses, delicate and beautiful, may be found in the interstices of any old wall, or at the foot of almost any tree or shrub. In the winter time mosses and lichens are found in fruit, and are beautiful objects. A pocket microscope lens is essential for their proper observation; and though the delicate carmine cups of the species known as the cup moss, and the familiar gray and yellow mosaic appearance we see on twigs and branches on our way, are easily recognized, the study of this form of winter vegetation is an inexhaustible one, and is an occupation for a lifetime, if earnestly pursued. We do not however, suggest that every one who endeavors to recognize the different species of moss, lichens, or fungi should necessarily do so through the medium of the microscope; but it will greatly add to the pleasure of making a collection out of doors if there be a good microscope at home, so that when the contents of the basket be turned out, after the winter's walk, there should be interest even in the fragments left, after a little pile of varied bits has been constructed, rivalling the choicest summer bouquet in beauty of form and color. We have seen such a collection formed into a beautiful object by raising a little mound of rough bits of bark in a plate or saucer, and placing on it varieties of fungus of every shade of red, brown, yellow, and gray. They seem to spring forth from a bed of sphagnum or bog moss of brightest emerald green; while a clump of the screw wall moss in fruit, with its curious little box-like capsules, supports a gray or yellow lichen, which has been gently removed from some old wall or tree. A bit of stick or a twig, incrusted with a bright orange-colored lichen, supports a trailing branch of delicate green ivy, the most beautiful and adaptable of all winter foliage. Over this little arrangement is placed a bell glass, to preserve it from dust and the effect of a dry atmosphere; and we know how pleasing to the eye is its varied beauty of form and color, lasting thus, a constant source of pleasure, for many a day without renewal.--_Chambers' Journal_.

* * * * *

IMPROVED HARNESS COCKEYE.

We illustrate herewith a very simple little device for attaching traces to the single tree. It forms a secure fastening which may be instantly attached, and which, by its construction, is prevented from wearing out rapidly.

Fig. 1 shows the cockeye attached to the single tree, and Fig. 2 exhibits parts in section, displaying the construction very clearly. The yoke is of the usual pattern. Swiveled to it is a long loop, which is chambered out to receive a spiral spring which acts upon a plunger. The latter is provided with a follower having a semicircular notch, which corresponds in form to the inside of the end of the loop. The follower also has guiding lips which extend over the sides of the loop. Through the yielding of the spring, the space between the follower and loop adjusts itself to studs or hooks of any size. Patented December 12, 1876, through the Scientific American Patent Agency. For further particulars, address the inventors, Messrs. F.W. Knapp and C. Schallhorn, Fiddletown, Amador county, Cal.

* * * * *

PROPOSED CREMATION TEMPLE.