Chapter V: Turret Lathe Practice

General Description of a Turret Lathe--Example of Turret
Lathe Work--Machining Flywheels in Turret Lathe--Finishing a
Flywheel at One Setting in Turret Lathe--Finishing a Webbed
Flywheel in Two Settings--Tools for Turret
Lathes--Box-tools--Examples of Box-tool Turning--Hollow
Mills--Releasing Die and Tap Holders--Self-opening Die
Heads--Collapsing Taps--Miscellaneous Turret Lathe
Tools--Turning Gasoline Engine Pistons in Turret
Lathe--Turning Piston Rings in Turret Lathe--Piston Turning
in Pratt and Whitney Turret Lathe--Attachment for Turning
Piston Rings--Turning Worm-gear Blanks in Turret
Lathe--Turning Bevel Gear Blanks--Shell Turning Operation in
Flat Turret Lathe--Chuck Work in Flat Turret
Lathe--Double-spindle Flat Turret Lathe--Automatic Chucking
and Turning Machine--Example of Work on Automatic Turning
Machine--Determining Speed and Feed Changes--Setting the
Turret Slide--Setting the Cross-slide Cam--Setting the Boring
Tool for Recessing--Adjustments for Automatic Feed and Speed
Changes--Turning Flywheel in Automatic Chucking and Turning
Machine--Automatic Multiple-spindle Chucking
Machine--Selecting Type of Turning Machine 178-241

CHAPTER VI

VERTICAL BORING MILL PRACTICE

Boring and Turning in a Vertical Boring Mill--Holding and
Setting Work on Boring Mill Table--Turning in a Boring
Mill--Boring Operations--Turning Tools for the Vertical
Boring Mill--Turning a Flywheel on a Vertical Mill--Convex
Turning Attachment for Boring Mills--Turning Taper or Conical
Surfaces--Turret-lathe Type of Vertical Boring Mill--Examples
of Vertical Turret Lathe Work--Floating Reamer
Holders--Multiple Cylinder Boring Machine 242-274

CHAPTER VII

HORIZONTAL BORING MACHINES

Horizontal Boring Machine with Vertical Table
Adjustment--Drilling and Boring--Cutters Used--Cutter-heads
for Boring Large Holes--Cylinder Boring--Boring a Duplex
Gasoline Engine Cylinder--Examples of Boring, Radial Facing
and Milling--Fixture for Cylinder Lining or
Bushing--Horizontal Boring Machine of Floor Type 275-297

INDEX 299-307

TURNING AND BORING