Chapter VI: Part I: FASTENINGS. 123 illus. 291 pp

demy 8vo. (_New York, 1903_) _net_ 12 6

=Chimney Design and Theory.= By W. W.
CHRISTIE. Second edition, 54 illus. 192 pp.
crown 8vo. (_New York, 1902_) _net_ 12 6

=Furnace Draft=: its Production by Mechanical
Methods. By W. W. CHRISTIE. 5 illus. 80 pp.
18mo, boards. (_New York, 1906_) _net_ 2 0

=The Stokers' Catechism.= By W. J. CONNOR.
63 pp. limp cloth. (_1906_) _net_ 1 0

=Treatise on the use of Belting= for the Transmission
of Power. By J. H. COOPER. Fifth edition, 94 illus.
399 pp. demy 8vo. (_New York, 1901_) _net_ 12 6

=The Steam Engine considered as a Thermodynamic
Machine.= By J. H. COTTERILL. Third
edition, 39 diagrams, 444 pp. 8vo. (_1896_) 15 0

=Fireman's Guide=, a Handbook on the Care of
Boilers. By K. P. DAHLSTROM. Eleventh edition,
fcap. 8vo, limp. (S. & C. SERIES, No. 16.) (_New
York, 1906_) _net_ 1 6

=Heat for Engineers.= By C. R. DARLING. Second
edition, 110 illus. 430 pp. 8vo. (FINSBURY TECHNICAL
MANUAL.) (_1912_) _net_ 12 6

=Diseases of a Gasolene Automobile=, and How to
Cure Them. By A. L. DYKE. 127 illus. 201 pp.
crown 8vo. (_New York, 1903_) _net_ 6 6

=Belt Driving.= By G. HALLIDAY. 3 folding plates,
100 pp. 8vo. (_1894_) 3 6

=Worm and Spiral Gearing.= By F. A. HALSEY.
13 plates, 85 pp. 18mo, boards.
(_New York, 1903_) _net_ 2 0

=Commercial Efficiency of Steam Boilers.= By
A. HANSSEN. Large 8vo, sewed. (_1898_) 0 6

=Corliss Engine.= By J. T. HENTHORN. Third
edition, 23 illus. 95 pp. square 16mo. (S. & C.
SERIES, No. 23.) (_New York, 1910_) _net_ 1 6

=Liquid Fuel= for Mechanical and Industrial Purposes.
By E. A. BRAYLEY HODGETTS. 106 illus. 129 pp.
8vo. (_1890_) 5 0

=Elementary Text-Book on Steam Engines and
Boilers.= By J. H. KINEALY. Fourth edition,
106 illus. 259 pp. 8vo. (_New York, 1903_) _net_ 8 6

=Centrifugal Fans.= By J. H. KINEALY. 33 illus.
206 pp. fcap. 8vo, leather. (_New York, 1905_) _net_ 12 6

=Mechanical Draft.= By J. H. KINEALY. 27 original
tables and 13 plates, 142 pp. crown 8vo. (_New
York, 1906_) _net_ 8 6

=The A B C of the Steam Engine=, with a description
of the Automatic Governor. By J. P. LISK.
6 plates, crown 8vo. (S. & C. SERIES, No. 17.)
(_New York, 1910_) _net_ 1 6

=Valve Setting Record Book.= By P. A. LOW. 8vo,
boards 1 6

=The Lay-out of Corliss Valve Gears.= By S. A.
MOSS. Second edition, 3 plates, 108 pp. 18mo,
boards. (_New York, 1906_) _net_ 2 0

=Steam Boilers=, their Management and Working.
By J. PEATTIE. Fifth edition, 35 illus. 230 pp.
crown 8vo. (_1906_) _net_ 4 6

=Treatise on the Richards Steam Engine Indicator.=
By C. T. PORTER. Sixth edition, 3 plates
and 73 diagrams, 285 pp. 8vo. (_1902_) 9 0

=Practical Treatise on the Steam Engine.= By
A. RIGG. Second edition, 103 plates, 378 pp.
demy 4to. (_1894_) 15 0

=Power and its Transmission.= A Practical Handbook
for the Factory and Works Manager. By
T. A. SMITH. 76 pp. fcap. 8vo. (_1910_) _net_ 2 0

=Drawings for Medium Sized Repetition Work.=
By R. D. SPINNEY. With 47 illus. 130 pp. 8vo.
(_1909_) _net_ 3 6

=Slide Valve Simply Explained.= By W. J. TENNANT.
Revised by J. H. KINEALY. 41 illus.
83 pp. crown 8vo. (_New York, 1899_) _net_ 4 6

=Shaft Governors.= By W. TRINKS and C. HOOSUM.
27 illus. 97 pp. 18mo, boards.
(_New York, 1905_) _net_ 2 0

=Treatise on the Design and Construction of
Mill Buildings.= By H. G. TYRRELL. 652 illus.
490 pp. 8vo. (_New York, 1911_) _net_ 17 0

=Slide and Piston Valve Geared Steam Engines.=
By W. H. UHLAND. 47 plates and 314 illus. 155 pp.
Two vols. folio, half morocco. (_1882_) 1 16 0

=How to run Engines and Boilers.= By E. P.
WATSON. Fifth edition, 31 illus. 160 pp. crown
8vo. (_New York, 1904_) 3 6

=Position Diagram of Cylinder with Meyer Cut-off.=
By W. H. WEIGHTMAN. On card. (_New
York_) _net_ 1 0

=Practical Method of Designing Slide Valve
Gearing.= By E. J. WELCH. 69 diagrams, 283 pp.
crown 8vo. (_1890_) 6 0

=Elements of Mechanics.= By T. W. WRIGHT.
Eighth edition, illustrated, 382 pp. 8vo. (_New
York, 1909_) _net_ 10 6

METALLURGY.

IRON AND STEEL MANUFACTURE.

=Life of Railway Axles.= By T. ANDREWS. 8vo,
sewed. (_1895_) 1 0

=Microscopic Internal Flaws in Steel Rails and
Propeller Shafts.= By T. ANDREWS. 8vo, sewed.
(_1896_) 1 0

=Microscopic Internal Flaws, Inducing Fracture
in Steel.= By T. ANDREWS. 8vo, sewed. (_1896_) 2 0

=Practical Alloying.= A compendium of Alloys and
Processes for Brassfounders, Metal Workers, and
Engineers. By JOHN F. BUCHANAN. With 41
illus. 205 pp. 8vo, cloth. (_New York, 1911_) _net_ 10 6

=Brassfounders' Alloys.= By J. F. BUCHANAN. Illustrated,
129 pp. crown 8vo. (_1905_) _net_ 4 6

=The Moulder's Dictionary= (Foundry Nomenclature).
A concise guide to Foundry Practice.
By JOHN F. BUCHANAN. New impression, 26
illus. viii + 225 pp. crown 8vo. (_1912_) _net_ 3 0

=American Standard Specifications for Steel.= By
A. L. COLBY. Second edition, revised, 103 pp.
crown 8vo. (_New York, 1902_) _net_ 5 0

=Pyrometry.= By C. R. DARLING. 60 illus. 200 pp.
crown 8vo. (_1911_) _net_ 5 0

=Galvanised Iron=: its Manufacture and Uses. By
J. DAVIES. 139 pp. 8vo. (_1899_) _net_ 5 0

=Management of Steel.= By G. EDE. Seventh
edition, 216 pp. crown 8vo. (_1903_) 5 0

=The Frodair Handbook for Ironfounders.= 160
pp. 12mo. (_1910_) _net_ 2 0

=Cupola Furnace.= A practical treatise on the
Construction and Management of Foundry
Cupolas. By E. KIRK. Third edition, 106 illus.
484 pp. demy 8vo. (_New York, 1910_) _net_ 15 0

=Practical Notes on Pipe Founding.= By J. W.
MACFARLANE. 15 plates, 148 pp. 8vo. (_1888_) 12 6

=Atlas of Designs concerning Blast Furnace
Practice.= By M. A. PAVLOFF. 127 plates, 14 in.
by 10-1/2 in. oblong, sewed. (_1902_) _net_ 1 1 0

=Album of Drawings relating to the Manufacture
of Open Hearth Steel.= By M. A. PAVLOFF.