Chapter XIII: =EXAMPLES IN LATHE WORK (Continued).=

=Ball Turning= with tubular saw 325
With a single tooth on the end of a revolving tube 325
With a removable tool on an arbor 325
Tool holder with worm feed 325
By hand 325
=Cams=, cutting in the lathe 326
Improved method of originating cams in the lathe 326
Motions for turning cams in the lathe 326, 327
Application of cam motions to special work 327
Cam chuck for irregular work 328
=Milling= or knurling tool 328
Improved forms of 328
=Winding Spiral Springs= in the lathe 329
=Hand Turning= 330
The heel tool 330
The graver and its applications 330, 331
Hand side tools 331
Hand round-nosed tools for iron 331
Hand finishing tool 331
=Hand Tools=, for roughing out brass work 332
Various forms and applications of scrapers 332, 333
Clockmakers' hand tool for special or standard work 334
Screw cutting with hand tools 334
Outside and inside chasers 334
Hobs and their uses 335
The application of chasers, and errors that may arise from
the position in which they are presented to the work 336
Errors commonly made in cutting up inside chasers 337
V-tool for starting outside threads 337
Starting outside threads 338
Cutting taper threads 338
Wood turning hand tools 338
The gauge and how to use it 338
The chisel and its use 339
The skew chisel and how to use it 339
Wood turners' boring tools for lathe work 340