Skip to content
The engineer's sketch-book of mechanical movements, devices, appliances, contrivances and details employed in the design and construction of machinery for every purpose

Chapter CII: Section 15: Clutches

Text size

(_See also p. 40._)

=1991. Coil-grip friction clutch.= By the Shaw Engineering Co., Bristol. The coil is of steel, in the form of a spring.

=1992. Internal grip friction clutch.= The internal ring is split at one side and expanded by the oval pin attached to the arm. The latter is usually reciprocated by a sliding sleeve on the shaft (as No. 282).

=1993. Jaw clutch= thrown into gear by partial revolution.

PreviousNext

Comments

Log in to leave a comment.

The engineer's sketch-book of mechanical movements, devices, appliances, contrivances and details employed in the design and construction of machinery for every purposeChapter CII: Section 15: Clutches

0%1 min left in chapter